novice braking maintenance question
novice braking maintenance question
Author
Discussion

A500leroy

Original Poster:

8,625 posts

149 months

Sunday 26th February 2017
quotequote all
Go easy on me cause I feel stupid for asking, my brake pads are dragging on the disc I can smell them, can I adjust them without renewing the pads? Would adjustment be bike specific?

Pothole

34,367 posts

313 months

Sunday 26th February 2017
quotequote all
A500leroy said:
Go easy on me cause I feel stupid for asking, my brake pads are dragging on the disc I can smell them, can I adjust them without renewing the pads? Would adjustment be bike specific?
If you've been riding through the winter salt and ste, your pistons are probably not returning fully into the calipers.

What bike is it?

A500leroy

Original Poster:

8,625 posts

149 months

Sunday 26th February 2017
quotequote all
CBR250

trickywoo

14,288 posts

261 months

Sunday 26th February 2017
quotequote all
You can't adjust them. As above - the piston will be sticking.

I've serviced a number of bike calipers and its not hard at all.

Do a search for rebuilding them and you are bound to find a how too guide.

The main thing that could go wrong is overtightening bolts during reassembly.

abw280

205 posts

297 months

Sunday 26th February 2017
quotequote all
Dead easy - lots of "how to's" on YouTube. All you really need is some hot soapy water and a toothbrush.......

A500leroy

Original Poster:

8,625 posts

149 months

Sunday 26th February 2017
quotequote all
OK, would I need to adjust the rear mastercylinder as there is some movement on it which might just release the pads a little

trickywoo

14,288 posts

261 months

Sunday 26th February 2017
quotequote all
Mastercylinder shouldn't be loose but unless its faulty itself or you have a kinked hose that won't have anything to do with the pads dragging.


cmaguire

3,589 posts

140 months

Sunday 26th February 2017
quotequote all
A500leroy said:
OK, would I need to adjust the rear mastercylinder as there is some movement on it which might just release the pads a little
Sounds like you're talking about the caliper and not the master cylinder. Any sliding piston caliper (piston or pistons on one side only)will rock a little if you try, and if it is totally solid then that indicates a fault such as piston sticking.

A500leroy

Original Poster:

8,625 posts

149 months

Sunday 26th February 2017
quotequote all


Cleaned and turned what I believe is an adjuster and lock nut as shown in the pic,much better now

Pothole

34,367 posts

313 months

Sunday 26th February 2017
quotequote all

CaptainSlow

13,179 posts

243 months

Sunday 26th February 2017
quotequote all
Might be hard to clean the rear caliper on a cbr250 considering it's a drum brake.

Pothole

34,367 posts

313 months

Sunday 26th February 2017
quotequote all
CaptainSlow said:
Might be hard to clean the rear caliper on a cbr250 considering it's a drum brake.
ROFL. As his picture shows!

Sorry, OP. We made assumptions based on grown up bikes!

dc2rr07

1,238 posts

262 months

Sunday 26th February 2017
quotequote all
Pothole said:
CaptainSlow said:
Might be hard to clean the rear caliper on a cbr250 considering it's a drum brake.
ROFL. As his picture shows!

Sorry, OP. We made assumptions based on grown up bikes!
He did say "my brake pads are dragging on the disc" to be fair smile

A500leroy

Original Poster:

8,625 posts

149 months

Sunday 26th February 2017
quotequote all
CaptainSlow said:
Might be hard to clean the rear caliper on a cbr250 considering it's a drum brake.
Check again my slow friend the CBR 250 has discs at both ends....;-)

CaptainSlow

13,179 posts

243 months

Sunday 26th February 2017
quotequote all
A500leroy said:
CaptainSlow said:
Might be hard to clean the rear caliper on a cbr250 considering it's a drum brake.
Check again my slow friend the CBR 250 has discs at both ends....;-)
I sit corrected.

eta,

you need to get out there with a bucket of soapy water, some brake cleaner and a toothbrush.

Edited by CaptainSlow on Sunday 26th February 15:51

A500leroy

Original Poster:

8,625 posts

149 months

Sunday 26th February 2017
quotequote all
CaptainSlow said:
I sit corrected.
biggrin;)biggrin no probs dude! It is a real bike! OK it's never going to go over 100mph but there again I'm a road rider and value my licence so it doesn't matter!