Sky TV remote

[PetrolTed]

Does anyone know how to tell it what TV is in use so that you can use the same controller for TV and Sky?

[TheExcession]

It's listed in the user guide.

Might be easier to tell what TV you have and I'll post the codes.

best
Ex

[PetrolTed]

User Guide? Don't seem to have one of those.

TV is a JVC LT-26C31BJE

[Mikey G]

Courtesy of Mr Google try these:-

0053 681, 081, 122, 399, 221, 218, 220, 064

[TheExcession]

OK - here goes:

1. Turn on your TV
2. Press TV on your sky remote
3. Hold down the select key and the red key together on your sky remote until the transmit light blinks twice
4. Press TV on your remote again
5. Key in the four digit code (for JVC use 0053)
6. Press Standby on your sky remote -

If the TV turns off press Select on your sky remote - the transmit light should blink twice. You're done!

If your TV does not then off press the TV button then press the Standby button.

Repeat this action until your TV turns off, then press Select

If the light on the remote blinks three times the remote has run out of codes for the TV.

HTH

best
Ex

>> Edited by TheExcession on Friday 25th March 13:43