Discussion
Hi guys wanted to do this for a while.. Im starting to build a Suzuki Rgv250 vj22. I am going to build it from scratch and have budgeted around £2000 to create a Lucky Strike tyga replica. Luckily i have found someone who has a good supply of parts such as engine cradle, frame, engine, tank and forks. Because the rest of the bike will have tyga bodywork i will not need the standard subframe or lights! Im hoping to get 3-4 parts a month so i should be finished by 2020!! ??
My first part arrived the other day a vj22 front wheel with brake discs and good bearings in it. I will be getting it powdercoated white and putting wavy discs on it

Im hoping the bike will look like this eventually!
My first part arrived the other day a vj22 front wheel with brake discs and good bearings in it. I will be getting it powdercoated white and putting wavy discs on it
Im hoping the bike will look like this eventually!
Edited by svracers on Friday 3rd March 05:49
Apologies about the last two pictures! Btw incase people are wondering what the tape is over the floor iv been marking out where my ramp can fit. Its not a massive garage- a new build single so around 6 meters wide by 10 meters deep with a strange alcove at the rear thanks to the stairs in the house! Iv now got led lights, nest smoke carbon monoxide alarm more powerpoints and heater/ dehumidifier set up.
Im buying these next!
£50 and im painting them gold and upgrading with new pistons, seals etc. Il try to provide regular updates if people are interested!
Edited by svracers on Friday 3rd March 05:48
Edited by svracers on Friday 3rd March 05:54
Edited by svracers on Friday 3rd March 06:02
Im certainly going to try. Myself and the wife have just had a baby but she is supportive of me doing it- could be a good destresser! I am aware though it will be a long journey. Some parts of the rgv250 are quite rare- especially the banana swingarm, wheels and a tank in good condition. Thanks for your comment
svracers said:
Im starting to build a Suzuki Rgv250 vj22. I am going to build it from scratch and have budgeted around £2000
Great project but as StuB says, you're being a little optimistic with the budget..... The engine alone might swallow that given a crank is 600 quid on its own.
Unless you can budget around 4 to 5k as a minimum, you're going to struggle to get to the end. Not wishing to sound like a nay sayer but having rebuilt an Aprilia RS250 I have a bit of previous in these things..... Good luck with getting some of the parts if you're building from scratch.........
I understand where both of you are coming from with relation to the budget. Im aiming to get 2-3 parts a month. Iv just bought a sidestand, front wheel bearings and some gaskets. Im planning on organising all the parts on the garage floor and keeping an inventory of what i need. The great thing is even though i have not got alot of mechanical experience, my best friend is a great bike mechanic with good knowledge of two strokes, in particular rs250s and rgvs. He has offered his services free of charge to help and advise. (As long as beer tea and coffee is supplied) to let you know his skill set he assembled a honda blackbird from its frame up in two days, including going through the engine.As i said before i have a good contact for all the major parts including engine, gearbox, frame, engine cradle, swingarm, forks and wheels. The engine and gearbox will be getting stripped and rebuilt to check for problems. Thanks for the encouraging words! Andrew
Brummie that is an impressive collection of parts for the vj22! I take it they are alot of the gaskets, fittings etc for the bike? Id also like to double check what paintscheme people like. Yet again i have a friend who runs a bodyshop and has offered a mates rate (£200) to paint and powdercoat everything! Il be paying his bar tab for a while but it will be worth it! Paintschemes im considering!

svracers said:
Brummie that is an impressive collection of parts for the vj22! I take it they are alot of the gaskets, fittings etc for the bike? Id also like to double check what paintscheme people like. Yet again i have a friend who runs a bodyshop and has offered a mates rate (£200) to paint and powdercoat everything! Il be paying his bar tab for a while but it will be worth it! Paintschemes im considering!

That right there is my dream bike 
Seriously, i loved these when i was 17 as they were just out but i couldnt afford one. If i had the time and skill id try recreate one just to piss the missus off and have it in the living room

Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


