Motorcycle ground anchor for multiple thick chains
Discussion
Looking for a ground anchor which I want to cement into the ground. The shackle or diameter of the eyelet needs to be quite large as I want to fit at least 2 chains which are both quite thick (>16mm).
Chains I'm using:
Almax series 4
Oxford Monster
Has anyone got any suggestions
Thanks
Chains I'm using:
Almax series 4
Oxford Monster
Has anyone got any suggestions
Thanks
Thanks for replying Hashtag but might go for one of these as it's way cheaper:
http://securityforbikes.com/proddetail.php?prod=AP...
http://securityforbikes.com/proddetail.php?prod=AP...
Ive got a few of these in my garage:
http://www.yanchor.com/index.html
I had a Monster chain/lock. Cant stand Oxford stuff, the 'Monster' lock was way too light, plastic bodied. Tat. Youll know this as I assume youve a Squire 65 to go with the Almax? Get another Almax then use the Pinch Pin youve linked to to join the chains using just one running through the Y anchor.
http://www.yanchor.com/index.html
I had a Monster chain/lock. Cant stand Oxford stuff, the 'Monster' lock was way too light, plastic bodied. Tat. Youll know this as I assume youve a Squire 65 to go with the Almax? Get another Almax then use the Pinch Pin youve linked to to join the chains using just one running through the Y anchor.
This is one of my ground anchors, bolted to the most inaccessible place in my garage.
http://modernscooters.co.uk/wp-content/uploads/201...
http://modernscooters.co.uk/wp-content/uploads/201...
the oxford monster will growl a bit then get snapped in 15 seconds
https://www.youtube.com/watch?v=MBXvcFYZhig
https://www.youtube.com/watch?v=MBXvcFYZhig
Personally I'd get some heavy wall 3 inch steel pipe and weld some base plates on it. 0.3"/7.62mm wall thickness is readily available. If you don't want to find pipe bends, you can use three straight sections butt welded together. For good measure fill it with cement before you weld the base plates on. That will give any
that wants to steal it something to think about.
that wants to steal it something to think about. Edited by creampuff on Thursday 9th March 21:29
creampuff said:
Personally I'd get some heavy wall 3 inch steel pipe and weld some base plates on it. 0.3"/7.62mm wall thickness is readily available. If you don't want to find pipe bends, you can use three straight sections butt welded together. For good measure fill it with cement before you weld the base plates on. That will give any
that wants to steal it something to think about.
Something along these lines would be my approach; length of pipe with a few heavy rods welded to it, sink the whole lot into the ground and concrete it in (leaving the ends of the pipe accessible, of course...). Might seem like a lot of work but you can hire a Stihl saw for a few quid, the metalwork wouldn't cost much and any fool can add water to ready-made concrete mix. Use the saw to create a grid of cuts and break out the pieces with a 4-pounder and brick bolster.
that wants to steal it something to think about. My bro's garage has a heavy gauge forged steel ring welded to a post about 18" long with cross-bars through it, we dug the floor out with just a hammer-action drill and sunk the anchor in so that only half the ring protrudes. Now his bike's sold the ring's a great trip hazard...

How about this...
Probably a lot harder work to cut than a motorbike one, cheaper, and a nice hole already there to stick some pipe through
http://m.ebay.co.uk/itm/Large-17-Ton-Screw-Pin-Bow...
Probably a lot harder work to cut than a motorbike one, cheaper, and a nice hole already there to stick some pipe through
http://m.ebay.co.uk/itm/Large-17-Ton-Screw-Pin-Bow...
Moulder said:
How about this...
Probably a lot harder work to cut than a motorbike one, cheaper, and a nice hole already there to stick some pipe through
http://m.ebay.co.uk/itm/Large-17-Ton-Screw-Pin-Bow...
TWENTY QUID??!! Robbing tu4t. I've scrapped them in better condition than that.Probably a lot harder work to cut than a motorbike one, cheaper, and a nice hole already there to stick some pipe through
http://m.ebay.co.uk/itm/Large-17-Ton-Screw-Pin-Bow...
I'm thinking what's needed is a double-walled arrangement with the cavity filled with lead. That way any cutting disc breaking through the outer wall gets clogged with lead (it smears rather than cuts) and jams.
Given that in industry you can't legally use an angle grinder unless you've completed an Abrasive Wheels course, all that's needed is a bit of legislation to stop scrotey-boy walking into B&Q with his dole money and buying one unless he can present ID and a valid chitty. They managed to stop shops selling glue to sniffers in similar fashion...
Two birds with one stone of course as it would also prevent Joseph T. Gormless-Public from buying one, using it to prune roses or whatever and getting a face full of shattered disc with which to tie-up A&E.
Edit: 'cutting disc' rather than 'grinder blade' FFS, what was I thinking?
Given that in industry you can't legally use an angle grinder unless you've completed an Abrasive Wheels course, all that's needed is a bit of legislation to stop scrotey-boy walking into B&Q with his dole money and buying one unless he can present ID and a valid chitty. They managed to stop shops selling glue to sniffers in similar fashion...
Two birds with one stone of course as it would also prevent Joseph T. Gormless-Public from buying one, using it to prune roses or whatever and getting a face full of shattered disc with which to tie-up A&E.
Edit: 'cutting disc' rather than 'grinder blade' FFS, what was I thinking?
Edited by Wedg1e on Friday 10th March 00:11
Wedg1e said:
Something along these lines would be my approach; length of pipe with a few heavy rods welded to it, sink the whole lot into the ground and concrete it in (leaving the ends of the pipe accessible, of course...). Might seem like a lot of work but you can hire a Stihl saw for a few quid, the metalwork wouldn't cost much and any fool can add water to ready-made concrete mix. Use the saw to create a grid of cuts and break out the pieces with a 4-pounder and brick bolster.
My bro's garage has a heavy gauge forged steel ring welded to a post about 18" long with cross-bars through it, we dug the floor out with just a hammer-action drill and sunk the anchor in so that only half the ring protrudes. Now his bike's sold the ring's a great trip hazard...
That's why I went Y anchor, if you get to a point where you don't need them then they can be filled in. And you can stick them anywhere without them causing a trip hazard of being an obstacle to get vehicles over.My bro's garage has a heavy gauge forged steel ring welded to a post about 18" long with cross-bars through it, we dug the floor out with just a hammer-action drill and sunk the anchor in so that only half the ring protrudes. Now his bike's sold the ring's a great trip hazard...

foxsasha said:
Wedg1e said:
Something along these lines would be my approach; length of pipe with a few heavy rods welded to it, sink the whole lot into the ground and concrete it in (leaving the ends of the pipe accessible, of course...). Might seem like a lot of work but you can hire a Stihl saw for a few quid, the metalwork wouldn't cost much and any fool can add water to ready-made concrete mix. Use the saw to create a grid of cuts and break out the pieces with a 4-pounder and brick bolster.
My bro's garage has a heavy gauge forged steel ring welded to a post about 18" long with cross-bars through it, we dug the floor out with just a hammer-action drill and sunk the anchor in so that only half the ring protrudes. Now his bike's sold the ring's a great trip hazard...
That's why I went Y anchor, if you get to a point where you don't need them then they can be filled in. And you can stick them anywhere without them causing a trip hazard of being an obstacle to get vehicles over.My bro's garage has a heavy gauge forged steel ring welded to a post about 18" long with cross-bars through it, we dug the floor out with just a hammer-action drill and sunk the anchor in so that only half the ring protrudes. Now his bike's sold the ring's a great trip hazard...

Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


