Bleeding brakes
Discussion
A500leroy said:
Can see an air bubble through the front master cylinder window
Bleeding it is the last thing you want to do, then. The reservoir isn't part of the sealed hydraulic system - air bubbles there are irrelevant. If you draw that "bubble" in, then you'll be introducing air into the circuit, not eliminating it.http://www.ebay.co.uk/itm/like/322412808318?lpid=1...
buy this and marvel at how f
king easy it is.
or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
buy this and marvel at how f
king easy it is.or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....As above buy one of these magic tools and never get stressed about bleeding brakes and clutches again,one word of advice keep the master cylinder topped up and check it constantly as it empties very quickly and you don't want air in the system or you will have to start from scratch,I did it first time I used it but after that never had a problem a cracking tool.
moanthebairns said:
http://www.ebay.co.uk/itm/like/322412808318?lpid=1...
buy this and marvel at how f
king easy it is.
or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
Lol, not having a pop at your mechanical prowess MTB, but most of us use the "sbuy this and marvel at how f
king easy it is.or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
tty return valve" and can change all of our brake fluid, in about 20 minutes (unless you have a mental Honda ABS system).That said I bought an "Eazi-bleed" system for about 20 quid that works well, uses the pressure from a spare tyre, and has a filled reservoir, so you just literally set the pressure and turn the caliper valve.
I did however buy it for the car. I still use the 1 way valve for the bike as I can't be bothered with the clean up.
Prof Prolapse said:
moanthebairns said:
http://www.ebay.co.uk/itm/like/322412808318?lpid=1...
buy this and marvel at how f
king easy it is.
or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
Lol, not having a pop at your mechanical prowess MTB, but most of us use the "sbuy this and marvel at how f
king easy it is.or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
tty return valve" and can change all of our brake fluid, in about 20 minutes (unless you have a mental Honda ABS system).That said I bought an "Eazi-bleed" system for about 20 quid that works well, uses the pressure from a spare tyre, and has a filled reservoir, so you just literally set the pressure and turn the caliper valve.
I did however buy it for the car. I still use the 1 way valve for the bike as I can't be bothered with the clean up.
tty Tokico brakes. TBF, they the ball valve works well for just a flush. Useless for empty lines. Prof Prolapse said:
moanthebairns said:
http://www.ebay.co.uk/itm/like/322412808318?lpid=1...
buy this and marvel at how f
king easy it is.
or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
Lol, not having a pop at your mechanical prowess MTB, but most of us use the "sbuy this and marvel at how f
king easy it is.or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
tty return valve" and can change all of our brake fluid, in about 20 minutes (unless you have a mental Honda ABS system).That said I bought an "Eazi-bleed" system for about 20 quid that works well, uses the pressure from a spare tyre, and has a filled reservoir, so you just literally set the pressure and turn the caliper valve.
I did however buy it for the car. I still use the 1 way valve for the bike as I can't be bothered with the clean up.
That said, on motorcycles sometimes you have to prime the system by using a syringe and pump fluid INTO the calliper and up to the reservoir to get the fluid flowing properly.
Dr Doofenshmirtz said:
Prof Prolapse said:
moanthebairns said:
http://www.ebay.co.uk/itm/like/322412808318?lpid=1...
buy this and marvel at how f
king easy it is.
or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
Lol, not having a pop at your mechanical prowess MTB, but most of us use the "sbuy this and marvel at how f
king easy it is.or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
tty return valve" and can change all of our brake fluid, in about 20 minutes (unless you have a mental Honda ABS system).That said I bought an "Eazi-bleed" system for about 20 quid that works well, uses the pressure from a spare tyre, and has a filled reservoir, so you just literally set the pressure and turn the caliper valve.
I did however buy it for the car. I still use the 1 way valve for the bike as I can't be bothered with the clean up.
That said, on motorcycles sometimes you have to prime the system by using a syringe and pump fluid INTO the calliper and up to the reservoir to get the fluid flowing properly.
You give them a loan of the gun, jesus, f
k me thats good, i'm getting on of those. moanthebairns said:
You have clearly never rebuilt 6 pot s
tty Tokico brakes. TBF, they the ball valve works well for just a flush. Useless for empty lines.
No I've not, and I can see where you're coming from in that instance, but the OP said for changing his fluids, not for rebuilding calipers or for any particularly difficult set up.
tty Tokico brakes. TBF, they the ball valve works well for just a flush. Useless for empty lines. Prof Prolapse said:
moanthebairns said:
You have clearly never rebuilt 6 pot s
tty Tokico brakes. TBF, they the ball valve works well for just a flush. Useless for empty lines.
No I've not, and I can see where you're coming from in that instance, but the OP said for changing his fluids, not for rebuilding calipers or for any particularly difficult set up.
tty Tokico brakes. TBF, they the ball valve works well for just a flush. Useless for empty lines. I guess my response is, if you're sure it's all you need why spend another tenner?
I would use the one way valve before a "fancy" set up on the CBR (I've not done the GSXR yet) because by the time I've set up the Eazi-bleed system I'd have finished changing the fluid on the old Honda.
You still have flush and clean every damned part after using it as well or it all goes cloudy, so again the s
tty wee valve saves time.
But yes, I agree, if you plan to rebuild calipers in the future, have a tricky system, or want to use it on a car I'd recommend spending a bit.
I would use the one way valve before a "fancy" set up on the CBR (I've not done the GSXR yet) because by the time I've set up the Eazi-bleed system I'd have finished changing the fluid on the old Honda.
You still have flush and clean every damned part after using it as well or it all goes cloudy, so again the s
tty wee valve saves time. But yes, I agree, if you plan to rebuild calipers in the future, have a tricky system, or want to use it on a car I'd recommend spending a bit.
moanthebairns said:
Dr Doofenshmirtz said:
Prof Prolapse said:
moanthebairns said:
http://www.ebay.co.uk/itm/like/322412808318?lpid=1...
buy this and marvel at how f
king easy it is.
or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
Lol, not having a pop at your mechanical prowess MTB, but most of us use the "sbuy this and marvel at how f
king easy it is.or
get a jam jar, tubing and a s
ty ball bearing working as a non-return valve, spend hours trying to fill six pot calipers with fluid, up and down, close open, pump....pump aw for f
ksake.....
tty return valve" and can change all of our brake fluid, in about 20 minutes (unless you have a mental Honda ABS system).That said I bought an "Eazi-bleed" system for about 20 quid that works well, uses the pressure from a spare tyre, and has a filled reservoir, so you just literally set the pressure and turn the caliper valve.
I did however buy it for the car. I still use the 1 way valve for the bike as I can't be bothered with the clean up.
That said, on motorcycles sometimes you have to prime the system by using a syringe and pump fluid INTO the calliper and up to the reservoir to get the fluid flowing properly.
You give them a loan of the gun, jesus, f
k me thats good, i'm getting on of those. Best £20 I've spent on tools
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




