Which trickle charger? 911 997
Which trickle charger? 911 997
Author
Discussion

JapanRed

Original Poster:

1,591 posts

140 months

Friday 31st March 2017
quotequote all
Hi all,

I've had the 911 2 years now and for the first 21 months never had battery issues (battery was replaced when I bought it). However twice since Christmas the car has failed to start after not being driven for 3 weeks each time. I assume this is normal and there's not an issue?

I'm going to have to buy a trickle charger but don't know which one. I've read that CTEK are the best but which model is required for my 997 C4S?

Thanks in advance.

Magic919

14,455 posts

230 months

Friday 31st March 2017
quotequote all
You can take your pick, but CTEK MXS 5.0 is popular.

Sounds like the battery is not the best. I'd be fine after three weeks.

anonymous-user

83 months

Friday 31st March 2017
quotequote all
I use a ctek mxs5.0 on my 997.2.

When the battery was replaced, the opc fitted the charging adapter onto the battery terminals.

LordHaveMurci

12,336 posts

198 months

Friday 31st March 2017
quotequote all
Mxs5.0 on my 996, been using it 2+ years now.

Maxym

3,005 posts

265 months

Friday 31st March 2017
quotequote all
When I had a 997 I used to drive it at least once a week and if it was going to be parked longer than much over that I hooked it up to a CTEK. No starting problems with that regime.

sidicks

25,218 posts

250 months

Friday 31st March 2017
quotequote all
Magic919 said:
You can take your pick, but CTEK MXS 5.0 is popular.

Sounds like the battery is not the best. I'd be fine after three weeks.
Just bought this exact charger - works well for my GT3.

JapanRed

Original Poster:

1,591 posts

140 months

Friday 31st March 2017
quotequote all
Thanks guys. I'll get the CTEK5.0 as recommended.

Battery is only 2 years old. Surely it shouldnt be failing already? It's a Bosch fitted by a well know Porsche indy.

sidicks

25,218 posts

250 months

Friday 31st March 2017
quotequote all
JapanRed said:
Thanks guys. I'll get the CTEK5.0 as recommended.

Battery is only 2 years old. Surely it shouldnt be failing already? It's a Bosch fitted by a well know Porsche indy.
It's not unknown...

Get the trickle charger and you should have no further problems!

JapanRed

Original Poster:

1,591 posts

140 months

Friday 31st March 2017
quotequote all
Thanks again guys. Any ideas how long the trickle charger will take to charge it enough to start? Considering it's dead as a dodo with key stuck in ignition (now removed) etc.

Magic919

14,455 posts

230 months

Saturday 1st April 2017
quotequote all
Letting a lead acid battery run low is a good way to shorten its life.

You'll need to charge until the battery reaches sufficient voltage (about 12.5). This will be limited by the size of the charger, 5 amps in the case of the CTEK above. A more powerful charger can do the job faster.

It might start after about 5-6 hours, but make sure you fully charge it.

If you think you would like to be able to charge more quickly, buy a bigger charger. I use an MXS 10.

JapanRed

Original Poster:

1,591 posts

140 months

Saturday 1st April 2017
quotequote all
Thanks guys. Is the MCS5 limited to certain size engines? I might be buying the old shape C63 next month (keeping the Porsche). Would the MXS5 still be ok if I ever needed to charge the 6.2?

Magic919

14,455 posts

230 months

Saturday 1st April 2017
quotequote all
No, they grade them like that so idiots can work out which one to buy.

blueSL

636 posts

255 months

Wednesday 5th April 2017
quotequote all
The CTEC chargers do a good job nursing a completely flat battery back to life. I inadvertently left the car without trickle charging over winter which meant it was completely flat. The CTEC brought it back to life but I agree it's important to let it charge the battery completely.

The car now starts easily but not with quite the same vigour as a new battery which makes me think it's not long for this world, so I carry a starter pack with me just in case.

JapanRed

Original Poster:

1,591 posts

140 months

Wednesday 5th April 2017
quotequote all
Thanks guys. I ordered one which should be delivered today. Hopefully be back in the car soon.

JapanRed

Original Poster:

1,591 posts

140 months

Sunday 9th April 2017
quotequote all
Just to update this thread. I got a CTEK5.0 and it's perfect for the job. Just run the leads through the gap in the top of the bonnet.

Thanks for the advice.