H1 Triple motor. What frame?
H1 Triple motor. What frame?
Author
Discussion

mickrick

Original Poster:

3,762 posts

204 months

Tuesday 4th April 2017
quotequote all
So, if you had a H1 500 Triple motor sitting under your bench, what 80's or 90's frame would you stick it in? I'm thinking a KawaSuki GSXR 400, ZXR or similar?
I'm sure it's been done before.
Any suggestions? Also, can anyone suggest a good source for parts for these motors?
I can feel a new project coming on wink

Edited by mickrick on Tuesday 4th April 07:38

Janluke

3,128 posts

189 months

Tuesday 4th April 2017
quotequote all
Try here- Rick Brent

http://www.classickawasaki.com/

He's relocated to the US but probably the most knowledgeable guy around on anything Kawasaki triple related

Kawasaki triples club forum- general club type forum, from seeing them at shows they do like a "special"

http://www.kawasakitriplesclub.net/index.php

gareth_r

6,793 posts

268 months

Tuesday 4th April 2017
quotequote all
You might need a full loop frame, like a GSXR400. It might be difficult to hang the H1 from a beam frame.

EDIT: Somebody did it with a GSXR400/H2:






I was searching for something a few months ago, and came across a pic of a Kawasaki ER-5 frame:



and I thought that if the subframe was removed, and replaced by a short, simple, triangle with horizontal top rails, and the engine was replaced by a BSA or Triumph twin (or Kawasaki triple?), and perhaps the tank was modified with a flat top, and you squinted a bit smile, it might make a sort of Seeley pastiche:







Edited by gareth_r on Tuesday 4th April 10:15

Steve Bass

10,758 posts

264 months

Tuesday 4th April 2017
quotequote all
Ducati monster with single sided swingarm. 2 stingers up on the open side and the third under the seat.

Pat H

8,058 posts

287 months

Tuesday 4th April 2017
quotequote all
The late 1980's Honda CB350 SG has a fine looking frame.

They handle and stop really well and are crying out for something more exciting than a 350 Superdream motor.




bimsb6

8,812 posts

252 months

Tuesday 4th April 2017
quotequote all
The kwikasfaki is the best looking of these hybrids .

mickrick

Original Poster:

3,762 posts

204 months

Tuesday 4th April 2017
quotequote all
Thanks for the replies. Yes it would have to be a cradle frame. The link to the Kwikasfaki seals it, it has to be a GSXR frame as I thought.
Off to e-bay... wink

mickrick

Original Poster:

3,762 posts

204 months

Tuesday 4th April 2017
quotequote all
What about a GSXR750 slingshot frame? Too big?

Farlig

633 posts

183 months

Tuesday 4th April 2017
quotequote all
mickrick said:
So, if you had a H1 500 Triple motor sitting under your bench, what 80's or 90's frame would you stick it in? I'm thinking a KawaSuki GSXR 400, ZXR or similar?
I'm sure it's been done before.
Any suggestions? Also, can anyone suggest a good source for parts for these motors?
I can feel a new project coming on wink
How ´bout a Caterham?
Mybe one with nice polished ally bodywork?
Yeah that would be cool - I think I know of one like that that just really needs an engine laughlaughlaugh

Yazza54

20,343 posts

212 months

Wednesday 5th April 2017
quotequote all
bimsb6 said:
The kwikasfaki is the best looking of these hybrids .
Each to their own, I always thought it was a bit too street fighter ish. Apparently it never actually worked anywhere near as well as it was promised to either.

Yazza54

20,343 posts

212 months

Wednesday 5th April 2017
quotequote all
That ER5 frame, or something similar looks like it could be a decent starting point.

graham22

3,328 posts

236 months

Wednesday 5th April 2017
quotequote all
That ER-5 frame looks a good answer, add a nice twin shock swinger and decent forks could look very modern/period, - got me thinking further - KLE500 Frame with fat 17" wheels for a mental TDR alternative with pipes everywhere?

Did think the ER5 may lead nicely to ER6s with the Supertwin potential to upgrade but the frames are quite different.

Agree with Yazza that the GSXR one looks a little too Streetfigher'ish.


As for the CB350 frame suggestion, do you realise how wide the Kwak Triple motors are. I can't ever remember the CB350s being renown for anything dynamic at all, did look alright though.

How about a late KH250 frame for some period mental?

bimsb6

8,812 posts

252 months

Wednesday 5th April 2017
quotequote all
Yazza54 said:
bimsb6 said:
The kwikasfaki is the best looking of these hybrids .
Each to their own, I always thought it was a bit too street fighter ish. Apparently it never actually worked anywhere near as well as it was promised to either.
Few specials do , bet it handled better than the original bike though .

Pat H

8,058 posts

287 months

Thursday 6th April 2017
quotequote all
graham22 said:
As for the CB350 frame suggestion, do you realise how wide the Kwak Triple motors are. I can't ever remember the CB350s being renown for anything dynamic at all, did look alright though.

How about a late KH250 frame for some period mental?
It's the cases which are a mile wide on the Kawasaki motors, rather than the barrels. I'm not saying it would fit but it might not be a million miles off.

As for the dynamics of the CB350, they handle very nicely and have a nice pair of twin piston calipers up front. What totally lets them down is the gutless 350 motor. It's a shame, because I think they are a good looking old thing.

Anyway, I agree with your suggestion of a KH250 frame. It would certainly look the part.





mickrick

Original Poster:

3,762 posts

204 months

Thursday 6th April 2017
quotequote all
Farlig said:
How ´bout a Caterham?
Mybe one with nice polished ally bodywork?
Yeah that would be cool - I think I know of one like that that just really needs an engine laughlaughlaugh
You can never have too many projects wink

mickrick

Original Poster:

3,762 posts

204 months

Sunday 16th April 2017
quotequote all
So, I decided if I'm going to use a cradle frame, I may as well use one that fits.
So I got my hands on a 76 KH frame with a V5 smile
Now I'm thinking modern upside down forks, supension etc.
I realised I don't actualy like the streetfighter look, and prefer the look of the original Kwacker smile
It's all just pie in the sky at the moment, as I'm at sea untill the end of September.
But it gives me time to sceme/dream.

Edited by mickrick on Sunday 16th April 07:21

Farlig

633 posts

183 months

Sunday 16th April 2017
quotequote all
mickrick said:
...So I got my hands on a 76 KH frame with a V5 smile


mickrick

Original Poster:

3,762 posts

204 months

Sunday 16th April 2017
quotequote all
I my word! That's it!
I'm off to the bathroom with a box of tissues!

B'stard Child

31,182 posts

277 months

Sunday 16th April 2017
quotequote all
Frame will need a lot of stiffening - they twist a lot under acceleration

Tango13

10,203 posts

207 months