Moulded ear plugs
Discussion
Ki3r said:
Can anyone recommend anywhere to get some moulded ear plugs? I don't get on with the foam ones and can never get them in right.
Budget of around £100, and down in Dorset if anyone can recommend anywhere here
.
I got some done a few years ago just by a local hearing place, I'm in east Devon ,they are well worth having, I got speakers in mine so added benefit is I've got a custom set of headphones as well, they will do normal ones for under £100 if I can remember Budget of around £100, and down in Dorset if anyone can recommend anywhere here
. I have Ultimate ear plugs and they are good but do not remove the level of noise a foam plug does.
My Ultimate ear plugs are great for all day. easy to use and wear all day but unless I'm out all day I will use foam plugs
ANd maybe try different pugs as I found I get on with some and not others
My Ultimate ear plugs are great for all day. easy to use and wear all day but unless I'm out all day I will use foam plugs
ANd maybe try different pugs as I found I get on with some and not others
I have Ultimate Ear ones too. They are very good but don't seal properly unless I use ear comfort gel or similar to aid their fitting.
If I don't, they let some high frequency wind noise past which annoys me and leaves my ears ringing.
They were a lot less than £100 although I had the discounted deal at the bike show a couple of years back.
If I don't, they let some high frequency wind noise past which annoys me and leaves my ears ringing.
They were a lot less than £100 although I had the discounted deal at the bike show a couple of years back.
If you struggle to put standard foam plugs in your ears I don't think getting custom moulded ones will solve the problem; they still need to go into your ears correctly. I think your best bet would be to figure out how to insert the plugs first & then look as custom moulds later.
For what it's worth the procedure I use is: Roll plug until it's small enough, use left hand to pull right ear upwards slightly then use right hand to put plug in ear.
For what it's worth the procedure I use is: Roll plug until it's small enough, use left hand to pull right ear upwards slightly then use right hand to put plug in ear.
E36GUY said:
I've just bought some titanium plugs from Flare Audio. Expensive at £50 but bloody good. (cheaper if you get the aluminium ones)
And I have the exact opposite experience with Flare Audio as regular foam ones beat these into a cocked hat. I've even tried putting Flare into one ear and foam into another for comparison and there's no doubt - I prefer foam. Far more comfortable and quieter than the fancy pants ones.Personally, I'm OK with the foam ones......
Best thing about this page was the juxtaposition with this relevant advert:

Wacky Racer said:
Have you tried mouldable swimming ones, Zoggs/Beco etc, 2 prs in a pack for £4.00, available in any decent sports shop?.
.....but this must be something to try first.Best thing about this page was the juxtaposition with this relevant advert:
cpl_payne said:
And I have the exact opposite experience with Flare Audio as regular foam ones beat these into a cocked hat. I've even tried putting Flare into one ear and foam into another for comparison and there's no doubt - I prefer foam. Far more comfortable and quieter than the fancy pants ones.
I like that the Flare ones are less invasive than the foams. I'd had issues with blocked ears recently probably from using the foam ones pushed in too far. Quite a few of the places for earplugs will sell you an assorted box of the foam ones. That way you can try them and see which ones work best for you.
use the howard leight ones
https://www.amazon.co.uk/d/gh3/40-Laser-Lite-Ear-P...
use the howard leight ones
https://www.amazon.co.uk/d/gh3/40-Laser-Lite-Ear-P...
E36GUY said:
cpl_payne said:
And I have the exact opposite experience with Flare Audio as regular foam ones beat these into a cocked hat. I've even tried putting Flare into one ear and foam into another for comparison and there's no doubt - I prefer foam. Far more comfortable and quieter than the fancy pants ones.
I like that the Flare ones are less invasive than the foams. I'd had issues with blocked ears recently probably from using the foam ones pushed in too far. Anyway, so the metal Flare ones don't actually go all the way into the canal, I don't believe they're designed to. I've tried all 3 supplied foam end sizes, the bigger ones don't even fit and the smaller ones still don't form a good enough seal to prevent a lot of noise. The metal parts stick out - while that's easier to remove it just feels uncomfortable and louder than foam ones. A month or so after Flare came out they released a new version called Flare Mini - I didn't want to spend more money but it could be that these actually work better.
Hi
Go look at Mercury Hearing and see whether they are attending a show or event anywhere near you in the near future, the regularly appear at equestrian shows, bikes shows and other events up and down the country and are excellent.
http://www.mercuryhearing.com/
Go look at Mercury Hearing and see whether they are attending a show or event anywhere near you in the near future, the regularly appear at equestrian shows, bikes shows and other events up and down the country and are excellent.
http://www.mercuryhearing.com/
my ear canal shape changes when i go from upright to tucked in behind screen and lets lots of wind noise in.
Learn how to fit the foam ones and save your money
to fit the foam ones, roll them up very tight (wetting your ear can help insertion, as can pulling your ear up and back) then slip it in quickly before it has a chance to expand. They need to go in until they're almost flush fitting. When looking in a mirror, you shouldnt be able to see them
Learn how to fit the foam ones and save your money
to fit the foam ones, roll them up very tight (wetting your ear can help insertion, as can pulling your ear up and back) then slip it in quickly before it has a chance to expand. They need to go in until they're almost flush fitting. When looking in a mirror, you shouldnt be able to see them
I got the DIY kit for custom ones a few years back, they do work, but I could not be bothered with the faff of having something else to clean every few rides. After a couple of ear infections that took weeks of anti biotics to get rid of, I went back to foam disposables.
Try a few different brands of foam, learn how to insert them properly and they are as good as anything - unless you want moulded with built in earphones or something......
Try a few different brands of foam, learn how to insert them properly and they are as good as anything - unless you want moulded with built in earphones or something......
This
gareth h said:
......the shape of the ear seems to change when I pull a helmet on.....
And thismckeann said:
my ear canal shape changes when i go from upright to tucked in behind screen and lets lots of wind noise in.
And especially thismckeann said:
Learn how to fit the foam ones and save your money
There are loads of different styles of foam plugs in as many different sizes - buy a variety bag and keep trying. When you find the right type & learn to fit them properly, you will be rewarded with a far superior noise reduction and lasting fit under the changing conditions inside a bike lid...Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



