Discussion
I swapped out my front pads, from the OEM Brembos, to some SBS sintered, as the Brembos were dead.
The SBS stop fine, but seem to have less initial bite and possibly a bit less overall stopping power, there just isn't much there unless you give it a good squeeze. Where as the Brembos you could feel them bite with just a little pressure.
Is this becasue the SBS are new? Or just different.
The SBS stop fine, but seem to have less initial bite and possibly a bit less overall stopping power, there just isn't much there unless you give it a good squeeze. Where as the Brembos you could feel them bite with just a little pressure.
Is this becasue the SBS are new? Or just different.
2wheelsjimmy said:
I swapped out my front pads, from the OEM Brembos, to some SBS sintered, as the Brembos were dead.
The SBS stop fine, but seem to have less initial bite and possibly a bit less overall stopping power, there just isn't much there unless you give it a good squeeze.
Same on my bike, though the Brembo pads seemed a little sharp until I got used to them. I think the SBS pads are half the price though.The SBS stop fine, but seem to have less initial bite and possibly a bit less overall stopping power, there just isn't much there unless you give it a good squeeze.
R1 Dave said:
Ive used the SC variant pads with good results
Exactly this. I run SA on the road bike which is one up on stock oem stuff I'm told. On the track bike I'll run SC as they fade less when hot Torque racing where I buy mine from said Brembo are a softer compound not in terms of grip but as in material than some of its rivals
It means they wear out quicker but don't kick the discs as hard. On a side from that I'm convinced that's why they give that nice initial feel... Although I could be wrong
Give those guys a call, they seem pretty knowledgeable with brake pad stuff
I normally stick with stock pads unless they are ridiculously expensive in which case I go for EBC.
I've tried so many different pads over the years and generally find that stock pads are best with EBC around equal or sometimes slightly better in terms of bite, feel, stopping power, wet performance etc.
I used to like the EBC green stuff pads as I felt they were noticeably better for overall stopping power but they always wore out far too fast.
I've tried so many different pads over the years and generally find that stock pads are best with EBC around equal or sometimes slightly better in terms of bite, feel, stopping power, wet performance etc.
I used to like the EBC green stuff pads as I felt they were noticeably better for overall stopping power but they always wore out far too fast.
Yeah, I went for SBS as stock were twice the price.
I am hesitant going back to stock, as when I pulled them to replace them, one of the pads had disintegrated and the material had come off the backing plate. Not very confidence filling. They had done 25,000miles and this winter was pretty harsh on the bike, the salt this year was gri.
The SBS are just standard sintered ones.
I'll see how they go, if I can't get used to them, then I'll try Brembo SC, which is what I think stock might be. Though not sure what the toshiba labelling that KTM given them is about.
I am hesitant going back to stock, as when I pulled them to replace them, one of the pads had disintegrated and the material had come off the backing plate. Not very confidence filling. They had done 25,000miles and this winter was pretty harsh on the bike, the salt this year was gri.
The SBS are just standard sintered ones.
I'll see how they go, if I can't get used to them, then I'll try Brembo SC, which is what I think stock might be. Though not sure what the toshiba labelling that KTM given them is about.
I've used the SBS HH and RS... I wasn't impressed with the HH either. The RS is a damn good pad ... certainly better than the Brembo sintered pads that came with my Brembo M4's. The less said about EBC HH pads the better. 
I've also used the Brembo SA's and SC's ... both are very good. I prefer the SC's myself, but as mentioned they do wear out quickly due to being a softer compound. I was pretty much using one set a year of SC's (8-9k miles plus a few track days) ...
I'll be buying SC's again shortly.

I've also used the Brembo SA's and SC's ... both are very good. I prefer the SC's myself, but as mentioned they do wear out quickly due to being a softer compound. I was pretty much using one set a year of SC's (8-9k miles plus a few track days) ...
I'll be buying SC's again shortly.
Mr OCD said:
I've used the SBS HH and RS... I wasn't impressed with the HH either. The RS is a damn good pad ... certainly better than the Brembo sintered pads that came with my Brembo M4's. The less said about EBC HH pads the better. 
I've also used the Brembo SA's and SC's ... both are very good. I prefer the SC's myself, but as mentioned they do wear out quickly due to being a softer compound. I was pretty much using one set a year of SC's (8-9k miles plus a few track days) ...
I'll be buying SC's again shortly.
Can I ask what you mean by your comment about EBC HH pads?
I've also used the Brembo SA's and SC's ... both are very good. I prefer the SC's myself, but as mentioned they do wear out quickly due to being a softer compound. I was pretty much using one set a year of SC's (8-9k miles plus a few track days) ...
I'll be buying SC's again shortly.
I use EBS HH sintered pads on my VFR and I think they are fine?
Dakkon said:
Mr OCD said:
I've used the SBS HH and RS... I wasn't impressed with the HH either. The RS is a damn good pad ... certainly better than the Brembo sintered pads that came with my Brembo M4's. The less said about EBC HH pads the better. 
I've also used the Brembo SA's and SC's ... both are very good. I prefer the SC's myself, but as mentioned they do wear out quickly due to being a softer compound. I was pretty much using one set a year of SC's (8-9k miles plus a few track days) ...
I'll be buying SC's again shortly.
Can I ask what you mean by your comment about EBC HH pads?
I've also used the Brembo SA's and SC's ... both are very good. I prefer the SC's myself, but as mentioned they do wear out quickly due to being a softer compound. I was pretty much using one set a year of SC's (8-9k miles plus a few track days) ...
I'll be buying SC's again shortly.
I use EBS HH sintered pads on my VFR and I think they are fine?
sjtscott said:
I've used EBC HH in multiple bikes over the years and initially they are very good with a great initial lever response.. they do tail off in terms of initial bite when you add miles and I found they did get affected running in very wet weather riding on other bikes I've owned.
Pretty much what I've found also... for sunny ride outs / track days they are fine.Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




t, i'll never use them on a motorbike because of this 



