fiddle with my pods
fiddle with my pods
Author
Discussion

nervous

Original Poster:

24,050 posts

259 months

Thursday 31st March 2005
quotequote all
hi gang,

have just got myself some cool new light pod things for my cerbera and would like to get them sprayed up and fitted. anyone know of anywhere good? the fitting should be a doddle, but id like to get the whole thing done by someone clever cos I'm a)a perfectionist and b) a club fisted monkey.

additionally, I'm thinking of having the pod lines blended out, which is obviously a bit more complicated in terms of spray etc, so if anyone knows of anyone up to the job within a decent radius of my gaff that'd be hugely appreciated.

i live near great yarmouth, in Norfolk. But please, don't hold that against me.

thanks in advance gang,
Nerv.

Extra 300 Driver

5,282 posts

275 months

Thursday 31st March 2005
quotequote all
Do not be fooled you Jedi.

A supersonic stone smashed my light lens. So I set about ordering a new lens and seal from Castle TVR. All was going well until I came to remove the pod to fit the new lens. TVR in their great wisdom stuck the pod down with epoxy resin and sealant. In order to get the old pod out I had to write it off! So one new pod one new lens and one new seal later it was fitted. £400 all in including spraying.

I see you’re in Norfolk, try Phill Woods in Essex. He is a very good TVR man.

nervous

Original Poster:

24,050 posts

259 months

Thursday 31st March 2005
quotequote all
thanks E3D/ Obi Wan, thats great. of course if you were a REAL friend youd use your jedi mind trick to get em fitted for me... thanks again buddy, greatly appreciated.

any other suggestions gang?

cerb`era

20 posts

266 months

Thursday 31st March 2005
quotequote all
Try `S&S Panel Craft` in Bradwell, Gt.Yarmouth. He likes TVR`s and does most of the trade work in Yarmouth - Good prices!!

nervous

Original Poster:

24,050 posts

259 months

Thursday 31st March 2005
quotequote all
thanks mate, thats great. have you used him then?

nervous

Original Poster:

24,050 posts

259 months

Thursday 31st March 2005
quotequote all
doh cant find their number anywhere, any clues cerb?

thanks again bud,
n.

cerb`era

20 posts

266 months

Thursday 31st March 2005
quotequote all
S&S number is 01493 652340. I`m in the motor trade thats how I know of them, but havn`t had any work done myself. I know a lot of Garages in the area use them as they are good VFM!

cerb`era over & out

nervous

Original Poster:

24,050 posts

259 months

Thursday 31st March 2005
quotequote all
thanks cerb'era, greatly appreciated.

best wishes,
mjb

TVRwhoa

349 posts

289 months

Thursday 31st March 2005
quotequote all
Whoa nervous

I'm sooooooooooooooooooo disappointed no story of angle grinding the front off your cerbera - pods stuck back on with duct tape
stories of limb loss whilst unplugging the lights - life is just not worth living - you'd better get this done before le mans I'm counting on my beer

you have my mail now too, now i realise it ends in .com