Woolich ECU Flash
Author
Discussion

Mr OCD

Original Poster:

6,388 posts

242 months

Friday 5th May 2017
quotequote all
I'm looking at having the ECU flashed on the Fireblade with Woolich tuning kit that has become pretty popular of late.

Anyone had it done, have experience of doing it?

I was expecting to bin off the Dynojet PCV, but a couple of tuners have recommended the base ECU flash, then using the PCV for fine tuning and multiple maps via the switch.



rat840771

2,028 posts

196 months

Friday 5th May 2017
quotequote all
Just had my K7 done with Woolich, bloody amazing!

I was told if you have a PC that they can tweak it with the software and save you a bit of money.

It wasn't cheap for the full on remap at £400, but at least now i know it is sorted.

The state of the previous woolich map from the previous tuner was a joke, half the euro 4 stuff was left on (02 sensor, exhaust flap), they hadn't touched the bottom end at all so only top 30% was changed so it was very lean low down, other stuff had been untouched, from memory throttle position, fuel etc, all figures were at zero

It now runs 84ftib and 175RWHS which he says is about right for a K7. Interestingly when they had the new 17 GSXR in for MCN test that only produced 175 and other ones produced 185. I think Suzuki are a bit miffed as to why it isn't reaching claimed power.


Mr OCD

Original Poster:

6,388 posts

242 months

Friday 5th May 2017
quotequote all
rat840771 said:
Just had my K7 done with Woolich, bloody amazing!

I was told if you have a PC that they can tweak it with the software and save you a bit of money.

It wasn't cheap for the full on remap at £400, but at least now i know it is sorted.

The state of the previous woolich map from the previous tuner was a joke, half the euro 4 stuff was left on (02 sensor, exhaust flap), they hadn't touched the bottom end at all so only top 30% was changed so it was very lean low down, other stuff had been untouched, from memory throttle position, fuel etc, all figures were at zero

It now runs 84ftib and 175RWHS which he says is about right for a K7. Interestingly when they had the new 17 GSXR in for MCN test that only produced 175 and other ones produced 185. I think Suzuki are a bit miffed as to why it isn't reaching claimed power.
That's what I've been told ... £400 for the ECU base map + custom tuning ... or £320 for ECU base map + custom tuning of the PCV (they can map in real time so is faster) ... I'm not really after more power. I simply want the fuel cut removed ... this will ensure the throttle is seamless. It's a trait of most modern bikes for emissions to control to cut fuel when the throttle is closed. Mine drives me potty when trailing the brakes into a corner and getting back on the power.

Obviously there are more benefits to the ECU flashing than just that. Such as ignition timing, etc.

Shadow R1

3,845 posts

207 months

Friday 5th May 2017
quotequote all
Interested how you get on with that.

I thought the pc3\5 had a pump accelerator feature that helped with that fuel cut thing ?

K8-600

1,724 posts

143 months

Friday 5th May 2017
quotequote all
rat840771 said:
It now runs 84ftib and 175RWHS which he says is about right for a K7. Interestingly when they had the new 17 GSXR in for MCN test that only produced 175 and other ones produced 185. I think Suzuki are a bit miffed as to why it isn't reaching claimed power.
Isn't this caused by the bike knowing it's on a dyno rather than the road? - I'm pretty sure they found out the bikes were all making power but for that reason not showing it on the dyno which would explains why the bike is winning most of the acceleration tests.