Dynax uc 50 over rust?
Dynax uc 50 over rust?
Author
Discussion

Riley26

Original Poster:

307 posts

141 months

Sunday 7th May 2017
quotequote all
Hi I have some rust coming through on the underside of the boot of my car. Is Dynax uc 50 effective sprayed other rust? I will try uploading a pic of the under side of the boot

Edited by Riley26 on Sunday 7th May 10:13

Ian Geary

5,392 posts

216 months

Sunday 7th May 2017
quotequote all
Hi,

Effective over rust? It might hide it for a bit, perhaps slow it down, but it's no way going to cure rust.

Nothing can do that. Krust I suppose can work if you get right back to bare metal and its still solid underneath, but if rust has taken hold the only solution is to cut out affected metal and replace.

It does seem to get good reviews for treating metal. I use acf50 on my motorbike and find it quite gloopy to apply, so might give this a go this winter.

I would clear the carpet and trim out of the way, then use a wire brush drill to see what's what.

Also, get under the car to see what's caused it, removing arch liners etc.

Hth

Ian

nosuchuser

838 posts

240 months

Sunday 7th May 2017
quotequote all
Wire brush, wash, de-grease then apply couple of coats of Hydrate 80. Some hammerite over the top of that then Dynax if it is on the underside of the car.. Should help for a bit