Suitable Router to Bond 4G LTE and ADSL
Suitable Router to Bond 4G LTE and ADSL
Author
Discussion

mikey k

Original Poster:

13,074 posts

247 months

Tuesday 9th May 2017
quotequote all
I live in the middle of nowhere and struggle to get decent download speeds.
ADSL speeds average is 1 Mbps, but it does spike at 18Mbps when they reset the cabinet settings frown
10ft from the living room I can get upto 35Mbps from the 4G smile

So I'm looking for a router that will bond the ADSL and the 4G LTE, hopefully to consistently get me over 30 Mbps!
I've found a few that use one or the other and then fall back to the second as back up

ie
http://www.draytek.co.uk/products/business/vigor-2...
https://www.asus.com/uk/Networking/4G-AC55U/

Not been able to find a suitable bonding one frown

Any one know of one or can make some recommendations

weeboot

1,065 posts

130 months

Tuesday 9th May 2017
quotequote all
I think you'll struggle with bonding, normally that needs to be done at both "ends" of the connection (IIRC).
Most of the products available will do failover, but I'm not sure whether you can specify a minimum speed threshold.

mikey k

Original Poster:

13,074 posts

247 months

Tuesday 9th May 2017
quotequote all
weeboot said:
I think you'll struggle with bonding, normally that needs to be done at both "ends" of the connection (IIRC).
Most of the products available will do failover, but I'm not sure whether you can specify a minimum speed threshold.
Good point on the "both ends"
The ASUS one you can specify the fall over point

robbieduncan

1,993 posts

267 months

Tuesday 9th May 2017
quotequote all
http://www.draytek.co.uk/information/our-technolog...

Draytek dual-WAN (say 2960) can load balance. This will not bond a single session/download though. Two parallel downloads will be faster in this situation as one will be on one connection and one other other but a single session/connection will be limited to one WAN connection

LotusMartin

1,127 posts

183 months

Tuesday 9th May 2017
quotequote all
OK - just done EXACTLY this - 'blended' (you're not going to be able to truely bond) my 5mpbs ADSL with 22mbps 4g

What you need is a £30 TP Link TP-LINK TL-R470T+ This is a load balancer at the packet level, which is as good as you're going to get.

Trick is to turn off DHCP on BOTH your routers and let the TP Link Box handle it. I've also set up policy routing so SKY for instance downloads on the unlimited (Slow) ADSL, rather than using up my 4G allowance.

Happy to help you on the phone if you struggle - just PM me.

mikey k

Original Poster:

13,074 posts

247 months

Tuesday 9th May 2017
quotequote all
robbieduncan said:
http://www.draytek.co.uk/information/our-technolog...

Draytek dual-WAN (say 2960) can load balance. This will not bond a single session/download though. Two parallel downloads will be faster in this situation as one will be on one connection and one other other but a single session/connection will be limited to one WAN connection
That might do the trick

mikey k

Original Poster:

13,074 posts

247 months

Tuesday 9th May 2017
quotequote all
LotusMartin said:
OK - just done EXACTLY this - 'blended' (you're not going to be able to truely bond) my 5mpbs ADSL with 22mbps 4g

What you need is a £30 TP Link TP-LINK TL-R470T+ This is a load balancer at the packet level, which is as good as you're going to get.

Trick is to turn off DHCP on BOTH your routers and let the TP Link Box handle it. I've also set up policy routing so SKY for instance downloads on the unlimited (Slow) ADSL, rather than using up my 4G allowance.

Happy to help you on the phone if you struggle - just PM me.
Thanks for that smile
I need to have a look at 4G signal in the house and CAT5 cable routes around it, but that also looks like a good route!

wombleh

2,411 posts

153 months

Tuesday 9th May 2017
quotequote all
There are VPN services that would let you bond both links together but no experience of them. Mushroom networks and viprinet show up on Google. As that gives control of both ends then you can load share rather than just connection balancing.

Suspect they'll be pricey though as they're aimed at business use.

mikey k

Original Poster:

13,074 posts

247 months

Wednesday 10th May 2017
quotequote all
wombleh said:
There are VPN services that would let you bond both links together but no experience of them. Mushroom networks and viprinet show up on Google. As that gives control of both ends then you can load share rather than just connection balancing.

Suspect they'll be pricey though as they're aimed at business use.
Yep looked at them crazy month for high data usage frown

LotusMartin

1,127 posts

183 months

Monday 15th May 2017
quotequote all
mikey k said:
Thanks for that smile
I need to have a look at 4G signal in the house and CAT5 cable routes around it, but that also looks like a good route!
I get zero 4g signal in my house, so mounted a omnidirectional antenna on my chimney. Its rock solid now even though the mast is 8km away. Luckily I had scaffolding up at the time which made it easy to test various ISPs to find the best - which was EE

mikey k

Original Poster:

13,074 posts

247 months

Monday 15th May 2017
quotequote all
LotusMartin said:
mikey k said:
Thanks for that smile
I need to have a look at 4G signal in the house and CAT5 cable routes around it, but that also looks like a good route!
I get zero 4g signal in my house, so mounted a omnidirectional antenna on my chimney. Its rock solid now even though the mast is 8km away. Luckily I had scaffolding up at the time which made it easy to test various ISPs to find the best - which was EE
That's my plan thumbup
Up a ladder at the weekend!
Did your antenna have two leads?

televisi

1 posts

97 months

Monday 29th October 2018
quotequote all
LotusMartin said:
OK - just done EXACTLY this - 'blended' (you're not going to be able to truely bond) my 5mpbs ADSL with 22mbps 4g

What you need is a £30 TP Link TP-LINK TL-R470T+ This is a load balancer at the packet level, which is as good as you're going to get.

Trick is to turn off DHCP on BOTH your routers and let the TP Link Box handle it. I've also set up policy routing so SKY for instance downloads on the unlimited (Slow) ADSL, rather than using up my 4G allowance.

Happy to help you on the phone if you struggle - just PM me.
Hi, I'm interested to do the same with the home connection in Australia (combine ADSL2+ and 4G).

Can you please let me know the following:
- How stable is this router?
- What is SKY?
- Would you please provide screenshots for your setting? I'm interested to setup the same - to have the download goes to a specific route, while upload goes to the 4G - also, would this create an issue
- Which router brand and model did you use to connect your 4G USB modem?
- OR, do you know another type from TP-LINK that supports USB input (to plug-in the 4G dongle)?


Bullitt Five-Oh

876 posts

98 months

Monday 29th October 2018
quotequote all
televisi said:
- What is SKY?
As an Aussie you should be ashamed of yourself, not to know what SKY is. Have you heard of Keith Rupert Murdoch, AC KCSG??