2001 Triumph Daytona 955i wont start!
Discussion
Hi, i'm hoping somebody can help me out with a quick fix, i stripped all the fairings and tank off for a re-spray, put it all back together exactly how it came apart and it just wont fire up. I should mention the battery was briefly disconnected just incase... the ignition switches on fine and the engine turns over, its as if its not getting fuel, or no spark? The thing is the bike ran perfectly fine before i stripped it. Is there something i need to do after reconnecting the battery? Can somebody shed some light on it please... TIA!
Is the fuel pump reconnected properly and working? You should hear the high pitched squeak as you turn the bike on. Other than that, I'm guessing you know the sidestand must be up for it to start? I'm guessing you haven't forgotten this as the engine doesn't turn over with it down. These bikes are known to be a bit hard to start if the battery is in poor shape, so check it's got a good charge.
Hope you can get it sorted, these bikes are simply superb when they're working. Their following is well deserved.
Hope you can get it sorted, these bikes are simply superb when they're working. Their following is well deserved.
Cheers for the quick reply, yea i can hear the fuel pump working when the ignition is switched on, are they not sopposed to start with the stand down? Think its only if its in gear the engine wont start if the stand is down isn't it? but the stand is up at the moment anyway since the bike is on paddock stands. The battery is in good shape aswell so i'm stumped. I Think it must be flooding it by now trying to turn it over all the time?
Yea i love the bike (when its working!) Perfect riding position, plenty of power and sounds sweet as! Just cant wait to get it sorted.
Yea i love the bike (when its working!) Perfect riding position, plenty of power and sounds sweet as! Just cant wait to get it sorted.
Loyly said:
Is the fuel pump reconnected properly and working? You should hear the high pitched squeak as you turn the bike on. Other than that, I'm guessing you know the sidestand must be up for it to start? I'm guessing you haven't forgotten this as the engine doesn't turn over with it down. These bikes are known to be a bit hard to start if the battery is in poor shape, so check it's got a good charge.
Hope you can get it sorted, these bikes are simply superb when they're working. Their following is well deserved.
You missed the bit about it won't start on the sidestand 'in gear' Hope you can get it sorted, these bikes are simply superb when they're working. Their following is well deserved.

OP you can buy a generic elm bluetooth reader off ebay and bluetooth to the Tuneecu app on a mobile for diagnostics and fault code reading, which may or may not help.
Private Pile said:
That can't be right about the side stand? As moulder said I'd be looking under the tank for problems. Also check the kill switch. Is there a fuel injection reset switch on these?
Its not, they will start quite happily on the sidestand, op did you mix up the connections on the fuel lines and plug the flow into the return by any chance?i'm pretty sure theres no kinks in the fuel lines and as far as I know everythings connected up correctly I just thought there might be something i'm missin, like you say, is there a reset procedure I need to do since the battery was disconnected? could the engine be flooded? I always thought that if it was it'd be fine and settle after a day or two? i'll try that Bluetooth elm reader and see if that helps. cheers!
just thinking,... I replaced the two quick release fuel line couplers with metal ones off ebay since I damaged the original plasic ones when removing the tank, has anyone had any experience with them before,.. just a shot in the dark but this is the only thing that's changed,.. they should be ok though surely?
just thinking,... I replaced the two quick release fuel line couplers with metal ones off ebay since I damaged the original plasic ones when removing the tank, has anyone had any experience with them before,.. just a shot in the dark but this is the only thing that's changed,.. they should be ok though surely?
Edited by AaronAnthony7 on Tuesday 16th May 17:51
If the tank has been off - ensure that the fuel lines are fully "clicked" back into the tank fittings, and that correct hose goes to supply and return, you should get a really positive click - make sure you don't trap the "O" ring on each hose fitting.
Also the fuel pump and fuel level sensor harnesses should be re-connected.
If the engine is cranking, I would suggest that it's fuel related, rather than spark.
Also the fuel pump and fuel level sensor harnesses should be re-connected.
If the engine is cranking, I would suggest that it's fuel related, rather than spark.
Regarding the side stand, I must be talking s
te again! I'm sure on my T595 that you can't start it with the side stand down, but perhaps I was in gear (though I usually have it in neutral for pushing it round the garden and into the garage where it lives). I'm going to test it out, I was in the habit of sitting on it, kicking the stand up, starting it and then putting it down on the stand whilst I put my gloves on.
te again! I'm sure on my T595 that you can't start it with the side stand down, but perhaps I was in gear (though I usually have it in neutral for pushing it round the garden and into the garage where it lives). I'm going to test it out, I was in the habit of sitting on it, kicking the stand up, starting it and then putting it down on the stand whilst I put my gloves on. The dodgy fuel sensor harness should not affect starting - if it's dodgy, the fuel light will flash, that's all.
Sounds like it could be your new fuel banjo's - If you have the tank off the bike, and press the steel collar down - does fuel come out?
You have said that you can hear the fuel pump pressurising, when the ignition is switched on?
The side stand switch would cut the starter - so that is not your issue.
Sounds like it could be your new fuel banjo's - If you have the tank off the bike, and press the steel collar down - does fuel come out?
You have said that you can hear the fuel pump pressurising, when the ignition is switched on?
The side stand switch would cut the starter - so that is not your issue.
I took the 'male' coupler part off the fuel pipe and plugged it into the couples on the tank (and held an empty bottle under it) to see if any fuel comes out and nothing came through, tried it again with turning the ignition on to see if anything pumped through and nothing again. Tried it on both of them and they're the same,.. looks like these are the problem does it?
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


