Wrong chain fitted?
Discussion
Had a replacement chain and sprockets fitted to my bike the other day by a dealer. On the ride home, there was a lot of chain noise and a bit of bounce as though the chain was too tight.
Got home, and there was about 25mm play (recommended 35mm). Trouble is, the adjuster looks like this:


As you can see, the rear nut is hanging off and I can't slacken the chain any further. Is this acceptable? Do I need to go back and get them to fit a longer chain?
Got home, and there was about 25mm play (recommended 35mm). Trouble is, the adjuster looks like this:


As you can see, the rear nut is hanging off and I can't slacken the chain any further. Is this acceptable? Do I need to go back and get them to fit a longer chain?
Have they fitted the correct size sprockets?
I'd be counting the number of teeth (front and rear sprockets) and then the number of links in the chain and compare that against the standard spec for your bike.
You'd be better off fixing it yourself as it doesn't look like they've done much of a job for you!
I'd be counting the number of teeth (front and rear sprockets) and then the number of links in the chain and compare that against the standard spec for your bike.
You'd be better off fixing it yourself as it doesn't look like they've done much of a job for you!
Check the number stamped on the front and rear sprockets and make sure they have correct number of teeth. They may have just fitted a chain with not enough links.
New chains do make a noise though. Recently fitted a new DID X-ring chain with some JT sprockets to one of my bikes, and there is a whine between 40-70mph, correct slack and lubed too.
New chains do make a noise though. Recently fitted a new DID X-ring chain with some JT sprockets to one of my bikes, and there is a whine between 40-70mph, correct slack and lubed too.
EagleMoto4-2 said:
Check the number stamped on the front and rear sprockets and make sure they have correct number of teeth. They may have just fitted a chain with not enough links.
New chains do make a noise though. Recently fitted a new DID X-ring chain with some JT sprockets to one of my bikes, and there is a whine between 40-70mph, correct slack and lubed too.
On a 600 Hornet front should be 15T rear 45T New chains do make a noise though. Recently fitted a new DID X-ring chain with some JT sprockets to one of my bikes, and there is a whine between 40-70mph, correct slack and lubed too.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



. Bodging
s.