Paddock stand - basics
Discussion
Hello,
Idiot maintenance question.
I have a xsr700, no centre stand and just the standard swing arm, will the below work on the bike - I.e do the cups just align to the rear axle and then lift?
https://www.amazon.co.uk/d/Automotive/5161-Black-A...
I presume that the other stands with bobbins are more secure if so, how easy are the bobbins to fit to the rear axle?
I would stress my maintenance skills are basically, cleaning, lubing and worrying!
Idiot maintenance question.
I have a xsr700, no centre stand and just the standard swing arm, will the below work on the bike - I.e do the cups just align to the rear axle and then lift?
https://www.amazon.co.uk/d/Automotive/5161-Black-A...
I presume that the other stands with bobbins are more secure if so, how easy are the bobbins to fit to the rear axle?
I would stress my maintenance skills are basically, cleaning, lubing and worrying!
You simply align the cups to your swingarm and that's it done. I don't like those sort of stands and prefer the bobbin ones. Fitting them is as simple as screwing a bolt into the pre existing holes on the swingarm. I'm assuming your model has the existing holes though.
Getting the bike onto a paddock stand is very easy, but nerve racking the first few times you try it.
Getting the bike onto a paddock stand is very easy, but nerve racking the first few times you try it.
I've got a single sided swing arm on my Triumph Daytona, I always try to get a hand when I put the bike on the stand, just someone to hold it steady whilst I hook it up and do the lift. I could probably do it on my own without issue but I like to have someone on standby to shout at in the event something goes wrong.
A paddock stand that uses bobbins will be a lot more secure that a universal fit one. According to google the bobbins for your swing arm are these and yes it is just a case of lining the hooks on the stand with the bobbins and pushing down.
https://evotech-performance.com/products/yamaha-xs...
Should be pretty easy to fit. As posted above Abba stands are better but more wonga, not sure if they come with but you also need the correct adaptors for the holes in your frame for the abba stand.
It all depends on what your doing with it. If like you say your mechanic skills are basic, are you going to need the added benefits of a abba stand? If your only using it to clean, adjust the chain, wheel rear etc then I'd go for the normal paddock stand. If your looking to expand your mechanical know how and start removing swing arms etc then an abba stand will be a massive benefit.
https://evotech-performance.com/products/yamaha-xs...
Should be pretty easy to fit. As posted above Abba stands are better but more wonga, not sure if they come with but you also need the correct adaptors for the holes in your frame for the abba stand.
It all depends on what your doing with it. If like you say your mechanic skills are basic, are you going to need the added benefits of a abba stand? If your only using it to clean, adjust the chain, wheel rear etc then I'd go for the normal paddock stand. If your looking to expand your mechanical know how and start removing swing arms etc then an abba stand will be a massive benefit.
Edited by kwaka jack on Sunday 21st May 21:26
Edited by kwaka jack on Sunday 21st May 21:28
For me personally -
Bobbin stand +1 for temporary lay up of a few days at a time i.e. summer time.
I have Abba Superbike stand two for taking the weight off the wheels if the bike is laid up for more than a few days i.e. winter. Takes about 10 minutes to put it on and off properly (slowly and carefully), and means i can shift it around the garage into the corner (including spinning it around).
However, i wish i had gone for the Abba skylift on wheels.
Bobbin stand +1 for temporary lay up of a few days at a time i.e. summer time.
I have Abba Superbike stand two for taking the weight off the wheels if the bike is laid up for more than a few days i.e. winter. Takes about 10 minutes to put it on and off properly (slowly and carefully), and means i can shift it around the garage into the corner (including spinning it around).
However, i wish i had gone for the Abba skylift on wheels.
I'll never understand why people bang on so much about Abba stands. Unless you're doing all the mechanical work yourself on your bike then they're an expensive luxury. A paddock stand with bobbins is going to cost £50 all in, even with the R&G ones that provide some crash protection too you're still looking at well under £100.
The OP has said he has limited mechanical skill and I don't see that having any mechanical skill is needed nowadays on bikes.
The OP has said he has limited mechanical skill and I don't see that having any mechanical skill is needed nowadays on bikes.
Gavia said:
I'll never understand why people bang on so much about Abba stands. Unless you're doing all the mechanical work yourself on your bike then they're an expensive luxury. A paddock stand with bobbins is going to cost £50 all in, even with the R&G ones that provide some crash protection too you're still looking at well under £100.
The OP has said he has limited mechanical skill and I don't see that having any mechanical skill is needed nowadays on bikes.
Me neither, front and rear stands for maintenance and for the rare occasions i want to remove the swing arm i ratchet strap the bike from the ceiling joist.The OP has said he has limited mechanical skill and I don't see that having any mechanical skill is needed nowadays on bikes.
BobSaunders said:
I have Abba Superbike stand two for taking the weight off the wheels if the bike is laid up for more than a few days i.e. winter.
Always left on the side stand otherwise, sometimes for months at a time!!! and never had any issues with the tyres.+1 for bobbins. Those cup lift ones, IME, can scratch the swing arm and tend to bend downwards which I suspect could lead to the bike sliding off (though this didn't happen to me when I had one).
If you want to spend a bit more then the Bursig style ones are very good but it's probably overkill for the sort of work you'll be doing.
If you want to spend a bit more then the Bursig style ones are very good but it's probably overkill for the sort of work you'll be doing.
Gavia said:
I'll never understand why people bang on so much about Abba stands. Unless you're doing all the mechanical work yourself on your bike then they're an expensive luxury.
1) Plenty of people do all the work on their bikes.2) Some people seem to get very nervous holding a bike vertical to get a paddock stand under the swingarm or bobbins.
They are overpirced IMO and I don't have one (I have a handy RSJ and a winch), but I can certainly see why people like them.
Mr2Mike said:
Gavia said:
I'll never understand why people bang on so much about Abba stands. Unless you're doing all the mechanical work yourself on your bike then they're an expensive luxury.
1) Plenty of people do all the work on their bikes.2) Some people seem to get very nervous holding a bike vertical to get a paddock stand under the swingarm or bobbins.
They are overpirced IMO and I don't have one (I have a handy RSJ and a winch), but I can certainly see why people like them.
Fearful fifer said:
Bit the bullet and bought the bobbins and stand on a popular auction site for about £58 all in..
If I drop the bike on the first few attempts I know who to blame????
It'll be absolutely fine!! Maybe get a helper for the first couple of trial runs, but its very easy & I suspect your bike's quite light. Whatever you do, remember to double check the side stand is down BEFORE you lower the bike off the paddock stand. Been there......If I drop the bike on the first few attempts I know who to blame????
I bought a paddock stand a few weeks ago with the bobbins and it doesn't work. Bobbins don't stick out far enough for the stand, its got a braced swing arm and the fittings on the stand go past and above the bobbins andscrape the main swinging arm (if that makes sense).
Luckily my mate offered me an unused Abba stand for £25 , picking it up today.
Luckily my mate offered me an unused Abba stand for £25 , picking it up today.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




