LT77 Speedo Transducer Wanted
LT77 Speedo Transducer Wanted
Author
Discussion

ukdj

Original Poster:

1,004 posts

200 months

Friday 26th May 2017
quotequote all
Anybody have one lying around ?

Engineer1949

1,423 posts

160 months

Friday 26th May 2017
quotequote all
interested in this i asume its for a later car is it for the speedo or the ecu.

john

v8s4me

7,266 posts

235 months

Friday 26th May 2017
quotequote all
TVR Parts did have some last year. You can get your old unit reconditioned by Speedy Cables.

ukdj

Original Poster:

1,004 posts

200 months

Friday 26th May 2017
quotequote all
its for an early chim, came back busted when gearbox refurbed - wires broken off at the unit, i guess i can dig out all the resin and resolder etc, just under the cosh for time and would be easier to just replace and repair this one when time allows.

adam quantrill

11,609 posts

258 months

Saturday 27th May 2017
quotequote all
Yeah you _must_ remove this stuff when sending the g/b off, same applies to the speedo drive gear, I got a recon exchange box back with a different gear and the speedo was miles out (too fast) afterwards.

GV

2,366 posts

240 months

Saturday 27th May 2017
quotequote all
Dumped my speedo for GPS works brilliantly until I hit a tunnel lol!

v8s4me

7,266 posts

235 months

Saturday 27th May 2017
quotequote all
OP - how many teeth does yours have and is it 4-pulse or 8-pulse? I have one somewhere but can't remember what it is. If you're stuck let me know what you have and I'll see if I can find it.

ukdj

Original Poster:

1,004 posts

200 months

Sunday 28th May 2017
quotequote all
Engineer1949 said:
interested in this i asume its for a later car is it for the speedo or the ecu.

john
it's for the ecu

ukdj

Original Poster:

1,004 posts

200 months

Sunday 28th May 2017
quotequote all
v8s4me said:
OP - how many teeth does yours have and is it 4-pulse or 8-pulse? I have one somewhere but can't remember what it is. If you're stuck let me know what you have and I'll see if I can find it.
I will take it apart later and let you know - cheers!

v8s4me

7,266 posts

235 months

Sunday 28th May 2017
quotequote all
No need to take it apart. Look through the little hole in the underside side of the boss and count how many times a little silver bit passes the hole. Is it 4 or 8?

TVR Parts No. F0041 might be what you want. If you have an 8-pulse unit count the number of teeth and PM me. I should have found it by this evening.

Edited by v8s4me on Sunday 28th May 09:15

RobXjcoupe

3,352 posts

107 months

Monday 29th May 2017
quotequote all
Is it the same type as used by jaguar in series 3 xj6?

RobXjcoupe

3,352 posts

107 months

Monday 29th May 2017
quotequote all

I used one of these on an LT77 in my jag. The securing nut needs to be carefully cut off and a fork and spacer made to secure in place.

v8s4me

7,266 posts

235 months

Monday 29th May 2017
quotequote all
Or like this?