2.8i Langford Exhaust System.

[John042]

Hi, my 1984 2.8i Wedge has a broken exhaust rear hanger. It's a rubber block that the rear box hangs on attached to a chassis member by a U bracket. Are these available? Or is it a self manufacture job? The exhaust system is the Langford type with two front boxes under each seat well. Thanks for any help chaps. Cheers J C.

[mrzigazaga]

Hi John


Is the rubber bolted through anything?
Like this....

http://www.ebay.co.uk/itm/UNIVERSAL-D-RUBBER-EXHAU...

[John042]

Hi again Mark. Yes looks similar. The round pin is attached to the exhaust box, the end into the rubber block bonded onto a plate and attached to the chassis tube by a U clamp Is it a generic part? Cheers Mate. J C.

[John042]

Sorry Mark missed the link, now on order from feebay. Thought I'd fixed the fuel gauge until fuelling this morning, now stuck at 1/4. Off to find some rough roads, easy in Devon!! Might shake it up a bit😂 Cheers Mark and thanks. J C.

[adam quantrill]

Isn't the wedge one shaped more like a mini hump-back bridge?

In which case maybe ebay item 261449432149 but cut in half might do the trick (and you get two for the price of one).

[John042]

Thanks Adam. Not too sure as half the rubber block is missing. All it appears to be is a flat plate with a square rubber block bonded to the surface with a hole for the exhaust box spigot. The mounting being attached to a chassis rail by an exhaust "U" clamp. The one that Mark suggested looks similar, we'll see on arrival. Between the two I'm sure it can be sorted Thanks again. J C.

[marcus1875]

That pic looks familiar Mark! Mine went at the weekend, ordered the one Mark suggested, not fitted yet, but looks like it will fit perfectly.

Marcus

[mrzigazaga]

marcus1875 said:

That pic looks familiar Mark! Mine went at the weekend, ordered the one Mark suggested, not fitted yet, but looks like it will fit perfectly.

Marcus

Hi Marcus

I borrowed the pic from a really kind fellow Wedger....

[adam quantrill]

Sounds like your one is completely different to the ones we have on the V8's then....