Which 250cc 2-Stroke?
Discussion
I've decided to get back into biking after selling my last bike nearly 9 years ago when my found out I was going to be a dad for the 1st time.
The plan is to sell my car (Lexus IS-F), buy a cheaper & more practical runaround (Saab 9-3/Alfa 159 Sportwagon), and then 2 bikes, one being a bigger 4-stroke that would get the most use and the other being a 250cc 2-stroke that would be more of an investment but would still get ridden in the summer.
Trouble is I like all of the different options of 250 race rep and don't know which to go for out of the NSR, RGV, TZR, RS & KR1S?
I've owned both a 96 mk1 RS & 98 mk2 RS previously and really enjoyed the pair of them.
Budget will be upto £6k.
On another note, after not riding for nearly 9 years I'm not sure whether to go straight onto an RSV1000, Blade or ZX10R, or start off again with a Japanese 600 or Ducati 749?
Previous bikes I've owned include the 2 RS250's mentioned above plus ZXR400, 2x ZX6R's, YZF750 & GSXR750.
The plan is to sell my car (Lexus IS-F), buy a cheaper & more practical runaround (Saab 9-3/Alfa 159 Sportwagon), and then 2 bikes, one being a bigger 4-stroke that would get the most use and the other being a 250cc 2-stroke that would be more of an investment but would still get ridden in the summer.
Trouble is I like all of the different options of 250 race rep and don't know which to go for out of the NSR, RGV, TZR, RS & KR1S?
I've owned both a 96 mk1 RS & 98 mk2 RS previously and really enjoyed the pair of them.
Budget will be upto £6k.
On another note, after not riding for nearly 9 years I'm not sure whether to go straight onto an RSV1000, Blade or ZX10R, or start off again with a Japanese 600 or Ducati 749?
Previous bikes I've owned include the 2 RS250's mentioned above plus ZXR400, 2x ZX6R's, YZF750 & GSXR750.
Im a bit biased but i would buy an rgv250 vj22 lucky strike or an rs250 aprilia. Im currently in the process of building up a tyga rgv250 in lucky strike colours. If you are looking for a great all round big cc bike go for a gsxr750 L1 onwards. I have one and they are fantastic bikes 👍 Good luck
The Mk 2 RS 250 is a good bet and it's properly sized. The Suzuki, Honda and Kawa always seemed 8/10ths scale to me 
As the last of the race reps it's better developed, lots of parts availability and the motor is basically the VJ22 mill. Lots can be done to hop it up to around 60 to 65 bhp so will go relatively well.
As for the other question, don't be such a sally.... If you've not had a drink in a while do you start off on the shandies???
Exactly!

As the last of the race reps it's better developed, lots of parts availability and the motor is basically the VJ22 mill. Lots can be done to hop it up to around 60 to 65 bhp so will go relatively well.
As for the other question, don't be such a sally.... If you've not had a drink in a while do you start off on the shandies???
Exactly!
Be prepared to a lot of hunting , traveling and keep an open mind, a sorted example of either will be better than a particular model needing a rebuild etc etc... haggle hard / avoid anything thats sat around for too long...great decision thou, they are really exciting things to ride and own.
Walter Sobchak said:
RGVs are ever so slightly more affordable than an RS250, I think my pick of the lot if you could find one within budget would be an MC28 NSR, they look even nicer than the Aprilia in my opinion, although don't think you can go wrong with any of them!.
If you are going for a NSR I would get the MC21 as it does not have the electronic card restriction like the MC28My ebay watchlist is like a who's who of 250cc GP replicas.
I like the Aprilia's, and having owned 2 I know what to expect with them. I'd say the Mk 1 95-97 models are the better looking of the 2 and I have my eye on a black one and a Reggiani Rep when my car sells.
The RGV in Lucky Strike or Pepsi colours would be an option and I have seen a few for sale, I remember sitting on these before and they are tiny!
Later NSR's seem to be out of my budget but I could get an MC18 or MC21, remember viewing an MC18 before I bought my last RS250 and it seemed a lot smaller and maybe a little more dated than the rest?
Plenty of TZR's for sale from an importer in Norwich, both reverse cylinder models and the later V-twin. I like the exhaust layout on the reverse cylinder but the twins look more modern with the different headlight.
KR1S seem to be a bit more scarce, and look dated next to a later TZR/RGV or RS.
Is any particular model less likely to be full power and more of a pain to de-restrict fully?
I like the Aprilia's, and having owned 2 I know what to expect with them. I'd say the Mk 1 95-97 models are the better looking of the 2 and I have my eye on a black one and a Reggiani Rep when my car sells.
The RGV in Lucky Strike or Pepsi colours would be an option and I have seen a few for sale, I remember sitting on these before and they are tiny!
Later NSR's seem to be out of my budget but I could get an MC18 or MC21, remember viewing an MC18 before I bought my last RS250 and it seemed a lot smaller and maybe a little more dated than the rest?
Plenty of TZR's for sale from an importer in Norwich, both reverse cylinder models and the later V-twin. I like the exhaust layout on the reverse cylinder but the twins look more modern with the different headlight.
KR1S seem to be a bit more scarce, and look dated next to a later TZR/RGV or RS.
Is any particular model less likely to be full power and more of a pain to de-restrict fully?
Tom_24 said:
Is any particular model less likely to be full power and more of a pain to de-restrict fully?
The later TZRs (3MA onwards) are restricted in many areas, when i was looking at one, after researching it, I decided not to bother just because of that.Same to a lesser extent goes for the later NSR250s and RGV VJ23's, IIRC NSR cranks are very difficult to source/rebuild as well.
You will find a more definite answer if you post here here...you'll also likely find a decent bike in fine fettle come up for sale at non eBay prices..
http://the2strokeforum.proboards.com/
Regarding the second bike, I haven't ridden for nearly a decade so was leaning more to the Ducati 749 to start off having never ridden a 1000cc bike.
It cant be that much different though if I respect the bike and know my limits so might go straight for the 1000 as would end up getting one eventually anyway.
Choice of models is even more of a headache, V-Twin or Inline 4? Never had a twin before.
It cant be that much different though if I respect the bike and know my limits so might go straight for the 1000 as would end up getting one eventually anyway.
Choice of models is even more of a headache, V-Twin or Inline 4? Never had a twin before.
podman said:
The TZRs later (3MA onwards) are restricted in many areas, when i was looking at one, after researching it, I decided not to bother just because of that.
Same to a lesser extent goes for the later NSR250s and RGV VJ23's, IIRC NSR cranks are very difficult to source/rebuild as well.
You will find a more definite answer if you post here here...you'll also likely find a decent bike in fine fettle come up for sale at non eBay prices..
http://the2strokeforum.proboards.com/
Ok thanks for the info, the TZR would be a 3MA or 3XV Jap import.Same to a lesser extent goes for the later NSR250s and RGV VJ23's, IIRC NSR cranks are very difficult to source/rebuild as well.
You will find a more definite answer if you post here here...you'll also likely find a decent bike in fine fettle come up for sale at non eBay prices..
http://the2strokeforum.proboards.com/
Will check that forum out.
Tom_24 said:
podman said:
The TZRs later (3MA onwards) are restricted in many areas, when i was looking at one, after researching it, I decided not to bother just because of that.
Same to a lesser extent goes for the later NSR250s and RGV VJ23's, IIRC NSR cranks are very difficult to source/rebuild as well.
You will find a more definite answer if you post here here...you'll also likely find a decent bike in fine fettle come up for sale at non eBay prices..
http://the2strokeforum.proboards.com/
Ok thanks for the info, the TZR would be a 3MA or 3XV Jap import.Same to a lesser extent goes for the later NSR250s and RGV VJ23's, IIRC NSR cranks are very difficult to source/rebuild as well.
You will find a more definite answer if you post here here...you'll also likely find a decent bike in fine fettle come up for sale at non eBay prices..
http://the2strokeforum.proboards.com/
Will check that forum out.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


