Race Wheels on the Road
Race Wheels on the Road
Author
Discussion

Wildfire

Original Poster:

9,951 posts

283 months

Saturday 10th June 2017
quotequote all
I have been offered some OZ Piega R wheels for my bike at a great price. But they do say "Race Only".

I take it this is to do with being not strong enough for pot holes and speed bumps on the road?

Or will I be ok?

Edited by Wildfire on Sunday 11th June 01:03

cmaguire

3,589 posts

140 months

Saturday 10th June 2017
quotequote all
Wildfire said:
I have been offered some OZ Piega R wheels for my bike at a great price. But they do say "Race Only".

I take it this is to do with being not strong enough for pot holes and speed bumps on the road?

Or wil I be ok?
Website doesn't say why but it'll probably be that they aren't going to warranty them against high mileage and crap surfaces. They are aluminium rather than magnesium so that removes that worry.
On a track bike you'll be fine, but I suspect that if the MOT tester sees something saying 'Race use only' you will not get a pass (whether they collapse from being bashed by potholes for mile after mile or not).
I had some ex-Steve Parrish Loctite Yamaha Magnesium wheels once. Nothing written on them and the bike passed MOTs but they needed pumping up every two days as they were slightly porous.

Wildfire

Original Poster:

9,951 posts

283 months

Sunday 11th June 2017
quotequote all
Cheers. The bike doesn't do mega mileage,and has passed MOT's with the "race only exhausts".

I'll have a think.

But I don't fancy them collapsing though.

WaferThinHam

1,680 posts

161 months

Sunday 11th June 2017
quotequote all
Wildfire said:
I have been offered some OZ Piega R wheels for my bike at a great price. But they do say "Race Only".

I take it this is to do with being not strong enough for pot holes and speed bumps on the road?

Or will I be ok?

Edited by Wildfire on Sunday 11th June 01:03
Could be a few reasons why they say "Race Use Only".

It could be that OZ just didn't see the reason to homologate them for road use. If they already had road legal wheels in their line up that were close enough to these, then they just wouldn't bother.

It could be that they genuinely are borderline, but I'd bet people use them for real road racing.

No problem from an MOT perspective (just put tape over the labels).

The problem would be if anything were to happen with them fitted. I.e. if you bin it into a bus stop full of disabled kittens and you haven't declared them to your insurance.....

Personally I'd be more worried about the insurance knock on than the likelihood of them failing (lets be honest you could just check them for damage once a month) so I wouldn't bother. Plenty of road legal wheels to choose from.

Edited by WaferThinHam on Sunday 11th June 15:20

Speed addicted

6,336 posts

258 months

Sunday 11th June 2017
quotequote all
Wouldn't wheels used for race circuit use and real road racing have to be stronger than ones used mainly for popping the shops?

Agree about the insurance aspect, it's a potential downside that you wouldn't have to consider with different wheels.

WaferThinHam

1,680 posts

161 months

Sunday 11th June 2017
quotequote all
Speed addicted said:
Wouldn't wheels used for race circuit use and real road racing have to be stronger than ones used mainly for popping the shops?
No pot holes on track, they're also checked a lot more often and thoroughly than your average road rider would.

In terms of real road racing, again very little in terms of potholes, and they'd get inspected a lot more. That said, I don't think they use magnesium or carbon wheels on the real roads any more after Robert Dunlop's crash years back?

Speed addicted

6,336 posts

258 months

Sunday 11th June 2017
quotequote all
WaferThinHam said:
Speed addicted said:
Wouldn't wheels used for race circuit use and real road racing have to be stronger than ones used mainly for popping the shops?
No pot holes on track, they're also checked a lot more often and thoroughly than your average road rider would.

In terms of real road racing, again very little in terms of potholes, and they'd get inspected a lot more. That said, I don't think they use magnesium or carbon wheels on the real roads any more after Robert Dunlop's crash years back?
Hadn't though of the inspection aspect. It's just that real road racing looks particularly harsh on bikes!

Gavia

7,627 posts

122 months

Sunday 11th June 2017
quotequote all
Speed addicted said:
Hadn't though of the inspection aspect. It's just that real road racing looks particularly harsh on bikes!
The road surfaces are not like normal roads, they are billiard smooth. Race wheels have a fixed short shelf life. They will be very strong and durable for a period of time, but once that's passed then they may start to deteriorate quickly.

There was a guy in BSB or WSB a few years. Ack at Donington who had a wheel collapse on him at Goddard's. That was due to buying a second hand wheel and not inspecting it fully and regularly.

Personally I'd avoid them.

WaferThinHam

1,680 posts

161 months

Sunday 11th June 2017
quotequote all
Gavia said:
There was a guy in BSB or WSB a few years. Ack at Donington who had a wheel collapse on him at Goddard's. That was due to buying a second hand wheel and not inspecting it fully and regularly.
Do you mean this one?





998420

929 posts

182 months

Sunday 11th June 2017
quotequote all
To be fair, the rear end grip never was up to much on those things anyway.

Wildfire

Original Poster:

9,951 posts

283 months

Sunday 11th June 2017
quotequote all
Cheers guys. I figured it was a strength thing and never considered the insurance aspect.

graeme4130

3,956 posts

212 months

Sunday 11th June 2017
quotequote all
I suspect that to class a wheel as a 'road wheel' it needs to be developed for every possible eventuality - i.e. At the far end of the scale, it needs to work for someone doing 100k miles on crappy potholed roads with a 90kg passenger and 100kg rider
I use the oz piega R wheels on my bike, and they're a well made but of kit. I wouldn't hesitate to use them on the road, but like said above, you might run into MOT issues if you get it tested (assuming they're thorough enough to check if they're marked 'not for road use', which I doubt) or insurance issues if you have a crash and they take a fine tooth comb to your bike