Bsa lightning problem 1969 650 cc twin
Bsa lightning problem 1969 650 cc twin
Author
Discussion

jedmate

Original Poster:

77 posts

193 months

Friday 16th June 2017
quotequote all
Hi folks
Can anybody tell me .If connecting a positive earth bike. The wrong way .to neg earth for a few minutes ,would this ruin the rectifier as l cannot get any power to the ignition switch, or ammeter .grateful for advice
Regards Dave

gareth_r

6,792 posts

268 months

Friday 16th June 2017
quotequote all
A damaged rectifier might stop the battery charging, but I don't think it would affect power to the ignition switch.

The rectifier is between the alternator and the battery (to convert alternating current to direct current). If the rectifier was removed completely there should still be (battery) power at the switch.

Usually, current flows from the battery, through the ammeter, then to the ignition switch. Is there power at the ammeter?
EDIT: You already said that there isn't. smile There should be an inline fuse between battery and ammeter. First guess is that it's blown.

If you don't have a wiring diagram, you should be able to find one online. The wiring on a late '60s BSA with Zener diode 12v electrics is pretty simple.

Edited by gareth_r on Friday 16th June 20:17

Vipers

33,525 posts

259 months

Friday 16th June 2017
quotequote all
Join BSA Single and Twins on FB.

crofty1984

17,064 posts

235 months

Saturday 17th June 2017
quotequote all
My positive earth Starfire has an inline fuse straight from the battery. That would be my first port of call.
Then connect a multimeter to the positive battery terminal and prod the circuit further and further away to see where your problem is.

In unrelated need, how do you find the lightning? My brother's building one at the moment.

jedmate

Original Poster:

77 posts

193 months

Saturday 17th June 2017
quotequote all

Hi crofty
Thanks for the reply.
If your brother would like a chat, about the bike ring me on 01889565314
I am in the midlands near Alton towers.
Best regards Dave

jedmate

Original Poster:

77 posts

193 months

Saturday 17th June 2017
quotequote all

Thank you for your reply Gareth.still struggling I am afraid. At the moment the horn is live on both connectors ,but works fine wired up off the bike ,straight to a battery ,so I have crossed wires somewhere .
Cheers Dave

Wacky Racer

41,419 posts

278 months

Saturday 17th June 2017
quotequote all
Great Bike. Good luck.

From the film "If"

(In Italian)

https://www.youtube.com/watch?v=2t4E9NY3644

(Malcolm M'cDowell didn't even have a full bike licence when they shot this, according to his pillion passenger, actor David Wood)

gareth_r

6,792 posts

268 months

Saturday 17th June 2017
quotequote all
1969 BSA A65 wiring diagram.

Found at
http://www.motobrit.com/motc2/mphp/photopage.php?p...



As you can see, power for the horn is taken from the battery side of the ammeter.

Of course, after 48 years there's no guarantee that it still looks like that. smile

You'll have to work through the circuit step by step with a meter or a test lamp.
Is there power at the battery side of the fuse?
Out of the fuse?
At the ammeter?
Out of the ammeter?
At the ignition switch?


Edited by gareth_r on Saturday 17th June 13:58