Kneeslider question
Author
Discussion

Esceptico

Original Poster:

8,897 posts

140 months

Saturday 1st July 2017
quotequote all


My kneesliders have seen (some) action at a few trackdays. Prior to going to Silverstone this week they were worn away in the centre. Whilst on track it felt like I was hitting the side of my leg on the deck - rather than the slider. When putting my leathers away I noticed that indeed the sliders were worn on the edge. I haven't consciously changed how I hang off the bike (although been a long time since being in track). The previous track days were generally on R6s and this week I used a 959 Panigale. Would that have made a difference in where the knee touches down? Or have I changed my positioning on the bike without realising it?

Rubin215

4,201 posts

187 months

Saturday 1st July 2017
quotequote all
Stop overthinking it or you'll fall off.

Did you had fun?
Did you get your knee down?
Did you put the bike away unscathed?

Job done.

Esceptico

Original Poster:

8,897 posts

140 months

Saturday 1st July 2017
quotequote all
Was just curious as to why my leg hitting the floor in a different place.

I had a great day. I got my knee down without getting the rest of me down with it so a successful day. Looking to book another one although planning to use my own bike next time.

nervous

24,050 posts

261 months

Saturday 1st July 2017
quotequote all
Peg height difference almost certainly changes the geo of your leg position.

tom_e

346 posts

130 months

Saturday 1st July 2017
quotequote all
Different bike, different geometry therefore you'll almost certainly be in a different position consciously or otherwise.

graeme4130

3,956 posts

212 months

Saturday 1st July 2017
quotequote all
The more lean angle you have, the less you have to put your knee out, so the further around the knee slider will touch, so you'll get a different contact patch

Wildfire

9,951 posts

283 months

Saturday 1st July 2017
quotequote all
Height of the pegs etc. All makes a difference. I have a good few different angles on my sliders, all different from different bikes.