Speed wobble...
Discussion
And not even going fast;
http://video.dailymail.co.uk/video/mol/2017/07/01/...
Never seen the likes of it.
http://video.dailymail.co.uk/video/mol/2017/07/01/...
Never seen the likes of it.

from another thread today.....
I s
t you not, I had a fish tale on Saturday. And not a little one on the power. A f
king huge one.I was on a empty nsl road, slight curve on it, good vision, doing about 120, all of a sudden the bars start to shake from side to side. I must have hit a bump, next thing its getting faster and faster. The bars turning radius increasing each time. I am a total passenger at this time and I've already accepted my fate, "f
k this is going to hurt I'm thinking". I kept a loose grip and slowly came off the throttle and as quick as it started it finished. Strange as fk. I've have a few of them a year on the ninja, its normally my own fault, too much acceleration, lean bump, but nothing this big out of nothing. I couldn't stop laughing after it, f
k knows how I got away with that, I only guess not trying to fight it and letting it come back in line. I hear the worst thing you can do is try to correct it with heavy input. The guy in the video has tried to brake and such, no, no. Limp, over tank, pray. I genuinely bought a lucky dip on the way home.
oh and remember, try your brakes before the next corner. My pistons were pushed back and I had nothing till i pumped it gently a few times.
I had ~15mph low side last week, and was entirely grateful for the textile kit and boots I was wearing, the armour absorbed all the shock in my right shoulder and elbow, unfortunately was left with a bruise on my outer left knee
the kit was scuffed up and my right boot Is a bit of a mess now to, the vent was ground down and is now permanently open, woops
Wear your kit lads and ladies, mine was only 15mph I could imagine the damage at 70 or more
the kit was scuffed up and my right boot Is a bit of a mess now to, the vent was ground down and is now permanently open, woops
Wear your kit lads and ladies, mine was only 15mph I could imagine the damage at 70 or more
catso said:
And not even going fast;
http://video.dailymail.co.uk/video/mol/2017/07/01/...
Never seen the likes of it.
http://video.dailymail.co.uk/video/mol/2017/07/01/...
Never seen the likes of it.

it starts of when he's only got one hand on the bars. Too much weight too high and too far back, and with just one hand on, probably even less weight on the front. You can see the load shifting about so not totally solid on the bike. If he'd put that stuff on the back in his bags, and/or kept it lower/closer to his butt on the rear seat, and/or tied it down real tight, and/or kept both hands on the bars he probably wouldn't have had the wobble. If he'd slammed on the brakes at the first sign (rear brake in particular) he could have saved it - that was a relatively low frequency wobble and not a vicious sports-style talk slapper. Oh, and maybe a leather jacket with some armour wouldn't have gone a miss either...
That's not the result of weight in the wrong place. Any and all luggage he has on the bike is lower and lighter than a pillion would be and with such a long wheel base and with that steering geometry, that bike should be rock solid stable . Something has broken or disconnected to cause such a situation.
Its probably been chopped, looking at the rake angle. So god knows what state the geometry is in or what the forks are made of and therefore how they flex at speed, the alignment of the front axle, the head-stock etc etc. It might be the first time hes gone that fast on the thing, knowing american roads. I feel sorry for the guy, you should be able to ride a Harley in a tank and jeans - that's what they're for but it looks like a good lesson in not f
king around with the factory spec of geometry, wheels, fork length etc.
I've always found applying more gas is the best way to solve any kind of instability. Bikes are never less stable than when off road and more gas solves pretty much everything. Or it at least ends the suspense quicker
king around with the factory spec of geometry, wheels, fork length etc. I've always found applying more gas is the best way to solve any kind of instability. Bikes are never less stable than when off road and more gas solves pretty much everything. Or it at least ends the suspense quicker

308mate said:
Its probably been chopped, looking at the rake angle. So god knows what state the geometry is in or what the forks are made of and therefore how they flex at speed, the alignment of the front axle, the head-stock etc etc. It might be the first time hes gone that fast on the thing, knowing american roads. I feel sorry for the guy, you should be able to ride a Harley in a tank and jeans - that's what they're for but it looks like a good lesson in not f
king around with the factory spec of geometry, wheels, fork length etc.
I've always found applying more gas is the best way to solve any kind of instability. Bikes are never less stable than when off road and more gas solves pretty much everything. Or it at least ends the suspense quicker
you try that at 120
king around with the factory spec of geometry, wheels, fork length etc. I've always found applying more gas is the best way to solve any kind of instability. Bikes are never less stable than when off road and more gas solves pretty much everything. Or it at least ends the suspense quicker


moanthebairns said:
308mate said:
Its probably been chopped, looking at the rake angle. So god knows what state the geometry is in or what the forks are made of and therefore how they flex at speed, the alignment of the front axle, the head-stock etc etc. It might be the first time hes gone that fast on the thing, knowing american roads. I feel sorry for the guy, you should be able to ride a Harley in a tank and jeans - that's what they're for but it looks like a good lesson in not f
king around with the factory spec of geometry, wheels, fork length etc.
I've always found applying more gas is the best way to solve any kind of instability. Bikes are never less stable than when off road and more gas solves pretty much everything. Or it at least ends the suspense quicker
you try that at 120
king around with the factory spec of geometry, wheels, fork length etc. I've always found applying more gas is the best way to solve any kind of instability. Bikes are never less stable than when off road and more gas solves pretty much everything. Or it at least ends the suspense quicker


Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


