V8 Vantage Roadster 08. Tyre pressure monitor. Smarttyre

[maintel]

Is unplugged!!!

Plugged it in but no idea if it's working. 2 wires snipped off from the connector & twisted together.

Possibly cos I have aftermarket wheels???

Can't find any info on Smarttyre website as they've ceased supporting this product.

Any thoughts?

[telum01]

Previous owner tried to bypass the TPMS system. So no, the system isn't working. Depending on how they did it, you should be able to reconnect the wires back to normal. But even then, chances are your sensors are dead and need to be replaced (which is why they snipped it up to begin with). It's also possible that you don't have sensors at all since you're on aftermarket wheels - original owner may not have swapped over the sensors.

Edited by telum01 on Friday 7th July 22:31