Different brake discs on front wheel?!!
Different brake discs on front wheel?!!
Author
Discussion

CTO

Original Poster:

3,021 posts

241 months

Wednesday 12th July 2017
quotequote all
Evening all,

Took my bike out on Saturday, and noticed what felt similar to warped discs on the front and pulsating through the brake lever.

Thought it may be that the bobbins needed freeing up, so spent eve doing that.

One disc, despite brake cleaner, a threaded nut and bolt with washers, and a socket rotating it, the bobbins still felt really stiff, hardly seemed to free up at all.

Tried the other wheel, the bobbins all free'd up straight away and could then be rotated by hand.

Looking at the back of the discs, and noticed that one side seemed to have what appeared to be compression type washers on the back of the bobbins, the other disc had flat washers.... so I scratched my head and had another lol and realised that the discs are different!?!

One disc has the pattern of four holes in a rotational style, the other has a patter of 2 3 3 2 (I think), in a vertical style, this is the one where the bobbins appeared to barely be loosened after some work...

So, the question I have is why would someone fit odd discs?

Hope the above makes sense, would be grateful for any answers or shedding of light... smile
Cheers.

Edited by CTO on Wednesday 12th July 22:19

Birky_41

4,667 posts

215 months

Thursday 13th July 2017
quotequote all
Previous owner may have left a disc lock on and bent one. It might have had a blow for some reason but for whatever reason it now has different discs fitted

It shouldn't affect the pulsating if both were new and to spec but I'd make a good guess that one of them is causing the issue

I recently had the same, sent them off to be straightened which the report came back they had got within a few thou and it was the best they could do. It helped bit didn't cure so meant I needed to cough up basically

You are basically gonna need to get your money out and replace or you'll spend ages of time patching up and messing about in my opinion

CTO

Original Poster:

3,021 posts

241 months

Thursday 13th July 2017
quotequote all
Thanks for the reply Birky.

It's going in today for new discs and pads. An annoyance, but its an area I don't want to be just hoping that it works if needed!

Birky_41

4,667 posts

215 months

Thursday 13th July 2017
quotequote all
CTO said:
Thanks for the reply Birky.

It's going in today for new discs and pads. An annoyance, but its an area I don't want to be just hoping that it works if needed!
I have a similar issue (same brand both sides oem discs) on my bike and it can make a ride really annoying so I know what you mean. Im a right tight arse but dont skimp in this area ever