Bracket coil mounting E2092

[ukkid35]

These mounting plates are NLA despite being on the website



Five years ago when I first replaced Coil Packs all the bolts had seized in the rivnuts, making things very awkward indeed, especially as two of the mounting bolts are underneath the rear coil pack.

Up til now I have been assembling the packs/plate, and then mounting it with just the four front bolts. I will continue to leave out the rear bolts but I have now made a crude fix with flange nuts and JB Weld. Replacing the rivnuts was not an option because so much material has been lost from the plate.





Now I should be able to remove a coil single pack with the plate in situ quite easily, as removing the entire assembly without disturbing the fuel rail is tricky, though not impossible.

[pmessling]

I have the CAD drawing if you want one Paul. Doing a sheet metal order next week so can get one done.

[pmessling]

That's how I have mine. But because of the SPA gauge the sensor is larger So have had to lift the coil packs up. The replacement I done in stainless and has cutouts in it.

[ukkid35]

pmessling said:

I have the CAD drawing if you want one Paul. Doing a sheet metal order next week so can get one done.

Many thanks for the offer.

I did consider contacting you, but decided to try the DIY route, thankfully seems to have worked so far.