Power Commander 3?
Discussion
Are they any good? I only ask as I'm looking at a bike that has one installed already. Also, you can buy a Dynojet quick shifter to compliment it. Are DJ shifters any good? THe only QS I have used is a HM one on a track day hire bike. It was fine, but others said HM aren't the best...
Any info/advice appreciated.
Thanks
Cad
Any info/advice appreciated.
Thanks
Cad
There is nothing really wrong with the DJ quickshifters. They work on a slightly different system to the HM/Woolwich ones, which kill the ignition and the fuelling. I believe the DJ ones kill just one element. There are plenty of people using the DJ ones, so no issue there. HM ones are good, I have used one with no issues on a race bike for a couple of years, before getting my current bike which has Woolwich on it. The HM/Woolwich are stand alone units, meaning they don't require a plug in module as per DJ. Personally, I would opt for HM.
DJ QS only work on fuel. Ignition cut via a strain gauge is where it's at for QS.
HM are the nuts for QS so don't know where you heard otherwise. They do various levels but even the basic is way better than the DJ offering.
The pc3 is fine, pc5 with self learning is better but depends on the bike. It's only really a benefit if the bike has an aftermarket exhaust / other engine work but having a pc3 wouldn't put me off.
HM are the nuts for QS so don't know where you heard otherwise. They do various levels but even the basic is way better than the DJ offering.
The pc3 is fine, pc5 with self learning is better but depends on the bike. It's only really a benefit if the bike has an aftermarket exhaust / other engine work but having a pc3 wouldn't put me off.
trickywoo said:
DJ QS only work on fuel. Ignition cut via a strain gauge is where it's at for QS.
HM are the nuts for QS so don't know where you heard otherwise. They do various levels but even the basic is way better than the DJ offering.
The pc3 is fine, pc5 with self learning is better but depends on the bike. It's only really a benefit if the bike has an aftermarket exhaust / other engine work but having a pc3 wouldn't put me off.
I had a pc5 fitted to my cb1300. basically, tuner said old metal doesn't need a pc5, stick to the 3 if its not very recent machinery and save moneyHM are the nuts for QS so don't know where you heard otherwise. They do various levels but even the basic is way better than the DJ offering.
The pc3 is fine, pc5 with self learning is better but depends on the bike. It's only really a benefit if the bike has an aftermarket exhaust / other engine work but having a pc3 wouldn't put me off.
I have a PC3 & quick shifter on my ZZR 1400 with full Akrapovic exhaust. Not the sort of bike you'd expect to have one but it came with the bike. Works absolutely fine but to be honest I don't really see a problem with using the clutch and when you knock the gear lever by mistake, it can be a pain in the arse as it tries to send you over the handlebars!
caduceus said:
Are they any good? I only ask as I'm looking at a bike that has one installed already. Also, you can buy a Dynojet quick shifter to compliment it. Are DJ shifters any good? THe only QS I have used is a HM one on a track day hire bike. It was fine, but others said HM aren't the best...
Any info/advice appreciated.
Thanks
Cad
If these parts are properly set up on a dyno - it's fine.Any info/advice appreciated.
Thanks
Cad
Personally I would not install PC3/PC5 and quickshifter and leave them on a standard map.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff



