I've got a tiny prick
I've got a tiny prick
Author
Discussion

Fleegle

Original Poster:

16,710 posts

207 months

Wednesday 2nd August 2017
quotequote all

hole in my alloy rad as a result of my interface with the gravel at Donny last week


Anybody have any recommendations for someone who can braze this in the Surrey/SW London area?

Birky_41

4,667 posts

215 months

Wednesday 2nd August 2017
quotequote all
What a way to get someone's attention haha

Gmx rads seem pretty good and are Brentwood based if I recall. They did my k6 and my mv agusta

Fleegle

Original Poster:

16,710 posts

207 months

Thursday 3rd August 2017
quotequote all
Birky_41 said:
Gmx rads seem pretty good and are Brentwood based if I recall.
I take it you're not a Geography teacher

Wildfire

9,951 posts

283 months

Thursday 3rd August 2017
quotequote all
Not sure, but you could try Malcolm at Classic Components in East Grinstead. He does welding and fabricating, if he can't help he'll probably know someone who can.

Birky_41

4,667 posts

215 months

Thursday 3rd August 2017
quotequote all
Fleegle said:
Birky_41 said:
Gmx rads seem pretty good and are Brentwood based if I recall.
I take it you're not a Geography teacher
No laughlaughlaughlaughlaugh

This is often mentioned on my ride outs. Im ok round a track or with satnav but thats about it...

Good luck with your small prick

mitzy

13,858 posts

228 months

Thursday 3rd August 2017
quotequote all
This thread tells me nothing I dont know already ..................................

twizellb

2,786 posts

243 months

Thursday 3rd August 2017
quotequote all
laugh

WinstonWolf

72,863 posts

270 months

Thursday 3rd August 2017
quotequote all
Have you tried plastic metal? I've fixed crankcases with that stuff and they're still going strong over a decade later.

Fleegle

Original Poster:

16,710 posts

207 months

Thursday 3rd August 2017
quotequote all
WinstonWolf said:
Have you tried plastic metal? I've fixed crankcases with that stuff and they're still going strong over a decade later.
I would prefer to have it professionally repaired

WinstonWolf

72,863 posts

270 months

Thursday 3rd August 2017
quotequote all
Fleegle said:
WinstonWolf said:
Have you tried plastic metal? I've fixed crankcases with that stuff and they're still going strong over a decade later.
I would prefer to have it professionally repaired
Fair enough, we used to use it as part of the production process when I built printing presses. You can tap it, mill it, you name it. I've fixed rads with it in the past, it outlasted the car smile

super7

2,275 posts

239 months

Thursday 3rd August 2017
quotequote all
Thought this was a confession for this thread....

https://www.pistonheads.com/gassing/topic.asp?h=0&...

:-)

Fleegle

Original Poster:

16,710 posts

207 months

Thursday 3rd August 2017
quotequote all
WinstonWolf said:
Fair enough, we used to use it as part of the production process when I built printing presses. You can tap it, mill it, you name it. I've fixed rads with it in the past, it outlasted the car smile
I appreciate your suggestion, it's just that it's for the track bike. When I pulled in on Saturday after a 35 minute stint, it was throwing a very fine spray over the front wheel.

It's a head thing !! I would actually do it on my road bike

shoestring7

6,196 posts

277 months

Thursday 3rd August 2017
quotequote all
Guildford Radiators, Cranleigh, GU6 8ND.

SS7

Fleegle

Original Poster:

16,710 posts

207 months

Thursday 3rd August 2017
quotequote all
shoestring7 said:
Guildford Radiators, Cranleigh, GU6 8ND.

SS7
Thanks, a nicer run for me than the EG alternative

R1 Dave

7,158 posts

294 months

Thursday 3rd August 2017
quotequote all
I've always used Watkins Radiators in Gloucester - proper 'man in a shed' operation but he's cheap and does a good job. I've always just posted the rad to him and he posts it back within a few days.