Any classic bike experts?
Any classic bike experts?
Author
Discussion

Bikesalot

Original Poster:

1,890 posts

189 months

Thursday 3rd August 2017
quotequote all
Are there any classic bike experts on here?

A bike in the family has made it's way into my grubby hands and i'd like to understand some more about it, and it's value (because I want it insured - naturally).

The bike has been in the family for a long time, its a late 1950 / early 1960s Norton Dominator with a Domiracer frame(?) It was raced by a family member until he passed in an unfortunate accident.

The bike was sold for wanting to remove any memories of this past time. Later, after a long search the bike was found in the corner of a barn looking a bit sorry for it's self and reclaimed from the owner to bring it back into the family.

The bike was then restored after a number of years - to a point.

It's now with me - it's all together, the engine was rebuilt but not started.

There is a HUGE box of history, hand written notes, race reports, set up notes etc etc.

I went to get it finished, get it started and get it to some shows but i'll want it insured.

If any interest I could start it's own thread with a more appropriate title and share some history / pictures.

gareth_r

6,792 posts

268 months

Thursday 3rd August 2017
quotequote all
First stop should be the Norton Owners' Club.

The implication of the racing history is that the bike is extensively modified, which normally reduces the value, unless that racing history is linked to a well-known rider. A documented racing history must be of some value, though.

The Norton frame of that era is known as the Featherbed. Until 1959 it was the "wideline", a name which was retrospectively applied when Norton introduced a revised, narrower, frame known as the "slimline" in 1960.

Norton made two models, the 500cc Model 88 and the 600cc Model 99, together with twin-carburettor 88 SS and 99 SS versions.

The Domiracer was a 1961 attempt to develop a racing bike to replace the Manx, but it was abandoned in 1962. IIRC, the Domiracer frame was the "lowboy", so called because the twin cylinder Dominator engine was lower in height than the Manx DOHC single, allowing the top tubes to be brought closer to the bottom tubes. The Domiracer project was sold to Paul Dunstall who used it as the basis for a tuning and customising business that was very successful until, I guess, around 1980. I think replica Domiracers were made, and I would guess that a genuine Norton Domiracer, of which there were very few, or even a genuine Dunstall version would be pretty valuable. Later replicas, probably not so much.

Engine and frame numbers start with 122 for a Model 88 500, or 14 for a Model 99 600. There is also a year letter, which, IIRC, is P for my 1959 Dommie project. smile All the 500/600 parts are interchangeable, but the 500 has a shorter stroke so fewer fins on the barrel - 8 vs 9, I think.

Parts availability is pretty good, with lots of crossover to the later 500 SS, 650 SS, Atlas, and Mercury, and even the Commando.

Definitely need pics. smile

gareth_r

6,792 posts

268 months

Thursday 3rd August 2017
quotequote all
Wideline




Slimline




Works Domiracer Lowboy vs Manx




Dunstall kit