head on a pint of beer
Discussion
when i buy 12 eggs, i expect 12 eggs. when i buy a kilo of beef, i expect a kilo of beef. etc etc
why is it when you buy a pint of beer its become normal to give you less than a pint usually by way of a stupidly large head or just short filling the glass?
archive in the first world problems folder please mods!
why is it when you buy a pint of beer its become normal to give you less than a pint usually by way of a stupidly large head or just short filling the glass?
archive in the first world problems folder please mods!
Jag_NE said:
but you arent getting an actual "pint" when a beer has a large head.
simples
"pint" of what?simples
It depends on what your are expecting to buy. With head, or without (Oooerrr).
Lets go time travelling - way back when Frodo & Sam staggered into the Barley Bree (or whatever it was called) you asked for and got a vessel full of something - either a jug or likely a tankard.
At some point some jobsworth decided to standardise all tankards. Fine, but what was being sold didn't change.
I expect a pint to have a head as part of that pint volume. Would have done so 2000 years ago, do so today. If the head is too much, I ask for a top up. If I don't receive it, I don't return.
motco said:
Some glasses are a pint to the brim, but in latter years they have been marked as a pint to a line below the brim and the head is a bonus.
Work of the devil. Nothing looks worse than a pint glass with a head that isn't full to the brim because the liquid has been filled to the line, but the head doesn't make up the difference. Ridiculous. Bah Humbug.There are two types of glass
Brim glasses are a pint to the brim, over size glasses include a printed line which marks a pint. Most ( but not all) specialist beer glasses marked with a brand are brim glasses. To check look for the line denoting the pint mark.
There is a tendency for bars to claim that 1 pint is the the pint word on the side of the brim glass, this is incorrect. As such most pints sold are actually short.
A pint can include a head, but it should be no more than 5% of the volume. If anyone asks for the liquid to be topped up if a head is too large, then the bar should do that.
If you are not happy with the contents, ask for it to be topped up.
Brim glasses are a pint to the brim, over size glasses include a printed line which marks a pint. Most ( but not all) specialist beer glasses marked with a brand are brim glasses. To check look for the line denoting the pint mark.
There is a tendency for bars to claim that 1 pint is the the pint word on the side of the brim glass, this is incorrect. As such most pints sold are actually short.
A pint can include a head, but it should be no more than 5% of the volume. If anyone asks for the liquid to be topped up if a head is too large, then the bar should do that.
If you are not happy with the contents, ask for it to be topped up.
SMB said:
There are two types of glass
Brim glasses are a pint to the brim, over size glasses include a printed line which marks a pint. Most ( but not all) specialist beer glasses marked with a brand are brim glasses. To check look for the line denoting the pint mark.
There is a tendency for bars to claim that 1 pint is the the pint word on the side of the brim glass, this is incorrect. As such most pints sold are actually short.
A pint can include a head, but it should be no more than 5% of the volume. If anyone asks for the liquid to be topped up if a head is too large, then the bar should do that.
If you are not happy with the contents, ask for it to be topped up.
good post. most pints are short in my experience and i dont think ive seen a glass with a pint line outside of a WMC. basically for every 8 or so pints you buy you are buying the landlord one back. Brim glasses are a pint to the brim, over size glasses include a printed line which marks a pint. Most ( but not all) specialist beer glasses marked with a brand are brim glasses. To check look for the line denoting the pint mark.
There is a tendency for bars to claim that 1 pint is the the pint word on the side of the brim glass, this is incorrect. As such most pints sold are actually short.
A pint can include a head, but it should be no more than 5% of the volume. If anyone asks for the liquid to be topped up if a head is too large, then the bar should do that.
If you are not happy with the contents, ask for it to be topped up.
Yes but whenever you buy a pint in a pub you are paying over the odds anyway. Just get some from the supermarket and pour it gently, problem solved at half the price.
But I want to socialise I hear you say. Then buy sparkling water and save money. No head there.
Then go down the supermarket and get rat arsed late into the night looking at second hand cars on PH and autotrader when you really shouldnt.
That's a good night out, cheaply, and a good night in, cheaply, hic ....
But I want to socialise I hear you say. Then buy sparkling water and save money. No head there.
Then go down the supermarket and get rat arsed late into the night looking at second hand cars on PH and autotrader when you really shouldnt.
That's a good night out, cheaply, and a good night in, cheaply, hic ....
Jag_NE said:
SMB said:
There are two types of glass
Brim glasses are a pint to the brim, over size glasses include a printed line which marks a pint. Most ( but not all) specialist beer glasses marked with a brand are brim glasses. To check look for the line denoting the pint mark.
There is a tendency for bars to claim that 1 pint is the the pint word on the side of the brim glass, this is incorrect. As such most pints sold are actually short.
A pint can include a head, but it should be no more than 5% of the volume. If anyone asks for the liquid to be topped up if a head is too large, then the bar should do that.
If you are not happy with the contents, ask for it to be topped up.
good post. most pints are short in my experience and i dont think ive seen a glass with a pint line outside of a WMC. basically for every 8 or so pints you buy you are buying the landlord one back. Brim glasses are a pint to the brim, over size glasses include a printed line which marks a pint. Most ( but not all) specialist beer glasses marked with a brand are brim glasses. To check look for the line denoting the pint mark.
There is a tendency for bars to claim that 1 pint is the the pint word on the side of the brim glass, this is incorrect. As such most pints sold are actually short.
A pint can include a head, but it should be no more than 5% of the volume. If anyone asks for the liquid to be topped up if a head is too large, then the bar should do that.
If you are not happy with the contents, ask for it to be topped up.
If I were being served pints (in unmarked glasses) where the head constituted 1/8 of the pint (or 12.5%) I would be asking (politely) for it to be topped up.
Frankthered said:
Reading this, I felt the need to have a look at my Upham glass, bought from the Basingstoke Beer Festival. It is marked with a line below the rim to indicate the pint - as somebody posed earlier, maybe branded glasses are usually so marked.
If I were being served pints (in unmarked glasses) where the head constituted 1/8 of the pint (or 12.5%) I would be asking (politely) for it to be topped up.
you shouldnt need to ask is my point. many people wont and are just gifting greedy landlords more profit. my mate ran a pub and he said the staff were coached to serve at a certain level that maximised profit (big chain pub).If I were being served pints (in unmarked glasses) where the head constituted 1/8 of the pint (or 12.5%) I would be asking (politely) for it to be topped up.
Frankthered said:
Reading this, I felt the need to have a look at my Upham glass, bought from the Basingstoke Beer Festival. It is marked with a line below the rim to indicate the pint - as somebody posed earlier, maybe branded glasses are usually so marked.
If I were being served pints (in unmarked glasses) where the head constituted 1/8 of the pint (or 12.5%) I would be asking (politely) for it to be topped up.
you shouldnt need to ask is my point. many people wont and are just gifting greedy landlords more profit. my mate ran a pub and he said the staff were coached to serve at a certain level that maximised profit (big chain pub).If I were being served pints (in unmarked glasses) where the head constituted 1/8 of the pint (or 12.5%) I would be asking (politely) for it to be topped up.
I hate a pint without a head. Cider won't hold one terribly well but my friendly local barmistress has done a nice job of this one. The etching in the base of the glass is keeping it suitably frothy at least for the first half and, frankly, if it has time to disappear altogether then you're drinking it wrong.

Gassing Station | Food, Drink & Restaurants | Top of Page | What's New | My Stuff




