Rebound adjuster
Discussion
Having a little play with the rebound adjustment on my rear shock just now I thought I would start by checking to see how many clicks of adjustment were available. From a starting position screwed all the way in, the adjuster unscrewed 58 clicks before the clicks started getting quieter before disappearing leaving the adjuster just smoothly unscrewing. When I screwed it back in the clicks returned.
Is this right???? The compression adjuster has clearly defined 20 clicks before it stops firmly at either end.
The shock is an Ohlins unit off a Tuono factory (AP8271), I know nothing of it's history as it is non-original to this bike (non-factory Tuono) and was on the bike when I bought it.
Is this right???? The compression adjuster has clearly defined 20 clicks before it stops firmly at either end.
The shock is an Ohlins unit off a Tuono factory (AP8271), I know nothing of it's history as it is non-original to this bike (non-factory Tuono) and was on the bike when I bought it.
Thanks, it struck me as not right for sure.
Someone has been doing something odd with the suspension on this bike, the ride quality is very poor in comparison to other bikes I've ridden. The rebound was set at 11 clicks where the manual recommends 20 clicks for sporty road riding and 13-16 for track.
Someone has been doing something odd with the suspension on this bike, the ride quality is very poor in comparison to other bikes I've ridden. The rebound was set at 11 clicks where the manual recommends 20 clicks for sporty road riding and 13-16 for track.
I don't think the compression adjuster is broken, 12 clicks is the manual recommendation for that, I think there is just a greater range of adjustment available for rebound.
I've been looking at Nitron shocks, I'm wondering whether to buy brand new from them or get this Ohlins unit refurbished.
100% suspension - These guys? Have you used them?
I've been looking at Nitron shocks, I'm wondering whether to buy brand new from them or get this Ohlins unit refurbished.
100% suspension - These guys? Have you used them?
skahigh said:
I don't think the compression adjuster is broken, 12 clicks is the manual recommendation for that, I think there is just a greater range of adjustment available for rebound.
I've been looking at Nitron shocks, I'm wondering whether to buy brand new from them or get this Ohlins unit refurbished.
100% suspension - These guys? Have you used them?
Nitron are great but the best option will be to get 100% to refurb the ohlins. I've heard nothing but good stuff about them. I've been looking at Nitron shocks, I'm wondering whether to buy brand new from them or get this Ohlins unit refurbished.
100% suspension - These guys? Have you used them?
Spoke to Mark Hammond today (MH Suspension in Chippenham) and he seemed to think the rebound adjuster behaviour was normal.
I have booked in for a rebuild on the rear shock anyway as I have needed a stiffer spring for ages and, having spent the last 3 days reading non-stop about suspension finally understand why (I think).
Progressive linkage + lots of preload + bigger rear sprocket (shorter swing arm) = harsh ride
I have booked in for a rebuild on the rear shock anyway as I have needed a stiffer spring for ages and, having spent the last 3 days reading non-stop about suspension finally understand why (I think).

Progressive linkage + lots of preload + bigger rear sprocket (shorter swing arm) = harsh ride
skahigh said:
Spoke to Mark Hammond today (MH Suspension in Chippenham) and he seemed to think the rebound adjuster behaviour was normal.
I have booked in for a rebuild on the rear shock anyway as I have needed a stiffer spring for ages and, having spent the last 3 days reading non-stop about suspension finally understand why (I think).
Progressive linkage + lots of preload + bigger rear sprocket (shorter swing arm) = harsh ride
If it's a black knob type adjuster in line with the shock shaft type ohlins then what you describe is perfectly normal. I have booked in for a rebuild on the rear shock anyway as I have needed a stiffer spring for ages and, having spent the last 3 days reading non-stop about suspension finally understand why (I think).

Progressive linkage + lots of preload + bigger rear sprocket (shorter swing arm) = harsh ride
Stop worrying, make sure your rebound is on the open end of the halfway point and you have a fast rebound without double bounce and enjoy
Ignore the above (terrible advice) and get it sent off. People so often overlook getting suspension serviced.
Gas shocks often loose pressure over time, and suspension oil gets dirty and contaminated over time just like engine oil does.
Gas shocks often loose pressure over time, and suspension oil gets dirty and contaminated over time just like engine oil does.
Edited by pitlane on Thursday 10th August 19:11
pitlane said:
Ignore the above (terrible advice) and get it sent off. People so often overlook getting suspension serviced.
Gas shocks often loose pressure over time, and suspension oil gets dirty and contaminated over time just like engine oil does.
Well done for missing the point so spectacularly. Gas shocks often loose pressure over time, and suspension oil gets dirty and contaminated over time just like engine oil does.
Edited by pitlane on Thursday 10th August 19:11
Reread the OPs question. Was a very simple one as to whether the rebound adjustment should loose the clicks at the open end of the adjustment range.
If it's a black knob located at the bottom of the shaft between the lower spring perch and the mounting eye on an Ohlins the yes it's normal. Question asked and answered.
Who's said don't service it?
Don't fret, it's Friday tomorrow, you've nearly made it

Steve Bass said:
Well done for missing the point so spectacularly.
Reread the OPs question. Was a very simple one as to whether the rebound adjustment should loose the clicks at the open end of the adjustment range.
If it's a black knob located at the bottom of the shaft between the lower spring perch and the mounting eye on an Ohlins the yes it's normal. Question asked and answered.
Who's said don't service it?
Don't fret, it's Friday tomorrow, you've nearly made it
Yep, it was a simple question, some differing opinions on the answer though. Either way, I'm happy that a rebuild will make it a redundant question and as you advised me about 9 months ago, I need a new spring anyway. Reread the OPs question. Was a very simple one as to whether the rebound adjustment should loose the clicks at the open end of the adjustment range.
If it's a black knob located at the bottom of the shaft between the lower spring perch and the mounting eye on an Ohlins the yes it's normal. Question asked and answered.
Who's said don't service it?
Don't fret, it's Friday tomorrow, you've nearly made it


It's taking a long time but the fog around the mystery of suspension is slowly clearing for me, sadly I'm one of the people who likes to understand how stuff (everything) works even if it takes me a while to get it.
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff


