Foam grips over heated grips?
Foam grips over heated grips?
Author
Discussion

H100S

Original Poster:

1,436 posts

204 months

Sunday 27th August 2017
quotequote all
Vibrations from the big guzzi make my hands tingle after a ride out for a couple of hours. Doesnt bother me on a shorter ride but next year i am planning on a 1k ride out in 24hours for charity. I figures the foam might take away some of the vibrations but i want to keep the heated grips.
Anyone run this combo?

TobyLerone

1,133 posts

175 months

Sunday 27th August 2017
quotequote all
Try get some thin pipe cladding and cable tie over the grips?

It's either very very cheap or free. Experiment now so you've got a solution in place ready for your big ride.

Nath911t

683 posts

228 months

Sunday 27th August 2017
quotequote all
I had this on my last bike. It was fine and they were just as hot.

H100S

Original Poster:

1,436 posts

204 months

Sunday 27th August 2017
quotequote all
Nice one Nath. Just what i hoped would be the answer.

fridgedoctor

220 posts

190 months

Sunday 27th August 2017
quotequote all
My bike came with Grip Puppies fitted by the guy before. They're pretty naff looking, and they seem to be glued on, but the heat still gets through ok.
I'm not sure if they help with vibration much.
I read somewhere heavier bar end weights work?

Nath911t

683 posts

228 months

Sunday 27th August 2017
quotequote all
The grip puppies* worked for me plus with different other things that life has thrown at me over the years, I had a throttle control aka cramp buster fitted as well.

That set up was ugly as sin but in the cold winter months when I wanted to take the bike out and kick it's head in, it worked quite well. I did have R&G bar ends on mine. It was a 2008 FZ1.

I've now got an MT09 Tracer and might fit them on there as well as that can be quite vibey.

  • Just look out if you do buy GP's as sometimes some places sell them both the same size when the throttle side should be bigger.

H100S

Original Poster:

1,436 posts

204 months

Sunday 27th August 2017
quotequote all
The weights are heavy but they are machined on the end to accept a machine screw for the Stelvio hand guards so options are limited.

I will give the foam grips ago and see how they work out. Hopefully they wont be too fat. From a apperance pov the hamdguards do a good job of hiding them.

H100S

Original Poster:

1,436 posts

204 months

Friday 1st September 2017
quotequote all
Grip foams all fitted up tonight. Pleased the heat comes through really well.

Nath911t

683 posts

228 months

Friday 1st September 2017
quotequote all
Looks like it fits well. Easy enough to put on?

tom_e

346 posts

130 months

Friday 1st September 2017
quotequote all
Nath911t said:
Looks like it fits well. Easy enough to put on?
I sprayed a bit of brake cleaner under mine as it evaporates nice and quickly and they slip straight on no problems.

H100S

Original Poster:

1,436 posts

204 months

Saturday 2nd September 2017
quotequote all
Very tight fit. Needed a soap solution and patience.
These were over Oxford touring heated grips.