R1 BB ECU Flash?
Discussion
Anyone done it ... ?
Spent a couple of days on the R1 doing some mileage across Wales... it's epic but I'd love to keep it in 'A' mode most of the time as the way the bike picks up from low down is brilliant ... except the throttle mapping is not so good in this mode. Very abrupt rolling on/off the throttle and apparently an ECU flash will sort this a treat. Standard and B mode's are fine.
Worth doing or shall I leave it the f
k alone? 
I'm also thinking if doing the ECU flash... I can get the Quickshifter to plug into the ECU ...
Spent a couple of days on the R1 doing some mileage across Wales... it's epic but I'd love to keep it in 'A' mode most of the time as the way the bike picks up from low down is brilliant ... except the throttle mapping is not so good in this mode. Very abrupt rolling on/off the throttle and apparently an ECU flash will sort this a treat. Standard and B mode's are fine.
Worth doing or shall I leave it the f
k alone? 
I'm also thinking if doing the ECU flash... I can get the Quickshifter to plug into the ECU ...

RemaL said:
I can't comment on the R1 but had my H2 ECU flashed but they also recommend the PC5 which I had and has made a huge difference to throttle response and power.
Who flashed it and with what?You don't need to use a PC5 with flash tuning an R1 really as you can map on a dyno using the harness kit and live emulation. A PC5 will make it easier for adjustments though in future.
I was looking at bench FlashTune from Velox Racing that is highly regarded on the R1 forums.
Prof Prolapse said:
You just can't leave your new toys alone can you?
I was waiting for that... 
No plans to modify this one other than some crash protection and the gash indicators, but possibly the ECU flash to sort the throttle mapping ... I do miss my quickshifter though immensely!!

Hell... I even like the standard exhausts.

mckeann said:
Mine was a little bit modified to be fair so not really fair for me to compare to standard road bike.
I'm sure if you live with the bike for a little while, you'll adapt to the changes from your old bike and learn to love it
The one I test rode was modified hence my decision to buy this one. I've done nearly 1000 miles on it now and do love it. They are only minor things after all. I'm sure if you live with the bike for a little while, you'll adapt to the changes from your old bike and learn to love it
I've considered the ECU flash too, but not gone for it on my 09 R1, mainly because I really like the engine braking and didn't want the bike to drop fuel in on a closed throttle, which I gather that the flash does (I could be wrong) in order to smooth out the throttle response when getting back on the throttle. I'd be interested to hear from anyone else who's done it and found good gains aside from ride-ability.
Incidentally, instead of the ECU flash, I put a -1 tooth sprocket on the front and went +2 on the rear. It's now got all the drive that I could ever want from it and makes it hilarious on roundabout exits.
Incidentally, instead of the ECU flash, I put a -1 tooth sprocket on the front and went +2 on the rear. It's now got all the drive that I could ever want from it and makes it hilarious on roundabout exits.

bennyboysvuk said:
I've considered the ECU flash too, but not gone for it on my 09 R1, mainly because I really like the engine braking and didn't want the bike to drop fuel in on a closed throttle, which I gather that the flash does (I could be wrong) in order to smooth out the throttle response when getting back on the throttle. I'd be interested to hear from anyone else who's done it and found good gains aside from ride-ability.
Incidentally, instead of the ECU flash, I put a -1 tooth sprocket on the front and went +2 on the rear. It's now got all the drive that I could ever want from it and makes it hilarious on roundabout exits.
Good points. Doesn't the sprocket change affect fuel economy and the speedo anyway?Incidentally, instead of the ECU flash, I put a -1 tooth sprocket on the front and went +2 on the rear. It's now got all the drive that I could ever want from it and makes it hilarious on roundabout exits.

Forgive me for a question that's slightly offtopic, but ... main dealers have a habit these days of applying updates to bikes when you take them in for a service (e.g. if there's been a software update) ... if you've had an ECU remapped/flashed as per this thread, could/would the dealer accidentally overwrite it again with a standard mapping ?
evil len said:
Forgive me for a question that's slightly offtopic, but ... main dealers have a habit these days of applying updates to bikes when you take them in for a service (e.g. if there's been a software update) ... if you've had an ECU remapped/flashed as per this thread, could/would the dealer accidentally overwrite it again with a standard mapping ?
I would assume it is possible ... the same way it is with cars.Mr OCD said:
Good points. Doesn't the sprocket change affect fuel economy and the speedo anyway?
You're absolutely right. I bought a speedo-healer to sort the speedo and the mileage, which I know the ECU flash can do anyway, but the gearing change has been truly dramatic in a way that I wouldn't expect the ECU flash to be. I've not noticed any drop in fuel consumption with the gearing changes, but then the bike is only in 6th for a very small amount of my commute. The front wheel seems to be on the ground a whole lot less now too so I get far higher mileage from my front tyre, which is a bonus. 
Gassing Station | Biker Banter | Top of Page | What's New | My Stuff




