Changing your own tyres
Changing your own tyres
Author
Discussion

Tagzy_biker

Original Poster:

17 posts

114 months

Wednesday 6th September 2017
quotequote all
I'm considering changing my own tyres and am wondering if there is anyone on here that has a DIY tyre change set up. I'm aware of most of the equipment needed including a bead breaker and tyre levers and just asking to see what other essential or helpful equipment I can buy. I'm doing this purely out of my own interest and amusement, I realise it is far easier and cheaper in the short term to go to a tyre place but I like a little project and I don't use my bike to commute so there's no urgency or rush to get them changed.

Thanks.

E36GUY

5,907 posts

249 months

Wednesday 6th September 2017
quotequote all
Can you balance your wheels after you have fitted tyres?

If not, back to the tyre place for you!

Tagzy_biker

Original Poster:

17 posts

114 months

Wednesday 6th September 2017
quotequote all
Tyre balancing frames are about £30-50

DuraAce

4,272 posts

191 months

Wednesday 6th September 2017
quotequote all
I do mine. You'll need a static balancer as well and a few weights etc.
Removal - I break the beads and then cut the tyre sidewall, tyre just falls off. I find 190 rears a bit of wrestle to get off. Doable but easier to cut off.
Fitting is easy. Get some proper tyre lube and they almost fall on.
I use local petrol station airline to seal the new beads.
If you've got tyre warmers use them before fitting the new ones, otherwise store them in the house for a bit to warm them up.
Stone cold rubber is hard to fit.


Edited by DuraAce on Wednesday 6th September 17:36

jjones

4,492 posts

224 months

Wednesday 6th September 2017
quotequote all
The balancing frames are cheap, easy to use and work really well.

When I looked at manual tyre machines i was looking at:
sealey tc965+nylon motorcycle bar £160+£65=£225

Jazoli

9,707 posts

281 months

Wednesday 6th September 2017
quotequote all
I do my own, a bead breaker, balancer and levers soap and weights should cost no more than £100 all in, its quite easy although very easy to damage your rims, I have recently started using the large cable tie method and it means there's little chance of any damage.

You also need a compressor, I have got most things seated with a either my £30 ECP mini compressor or local morrisons forecourt one but struggled with michelins, a decent 50 litre compressor will seat almost anything.

Its not really the cost saving, as I've probably saved £200 all in, its the convenience, I have one bike garage within 20 miles, if you have a good supply of scrubs its very cost effective mind.

Edited by Jazoli on Wednesday 6th September 17:34

AdamIndy

1,661 posts

135 months

Wednesday 6th September 2017
quotequote all
Yep I change my own. Just put a new wet on in case I need it at donington.

Essentials are a valve core tool, bead breaker, rim protectors, tyre levers and tyre soap. I have used fairy liquid but seems to dry out fairly quickly. Getting the last bit of the bead over the rim can be a right tt of a job. Also now is the time to change the valve as well if you feel it's necessary.

If you are balancing them yourself then you will need a balancer(obviously), some weights and some patience.

For the cost of it though, mine has paid for itself many times over!

DuraAce

4,272 posts

191 months

Wednesday 6th September 2017
quotequote all
Cue lots of people who have "a chap" who fits a pair of tyres for £5 at the drop of a hat and gives a free reach around!

Nobody near me will fit them for less than £10 per tyre (to loose wheels). Often they won't fit tyres they haven't supplied, if they will they take ages to do them. 2 or 3 pairs a year fitted at home, and a few for friends adds up to a good saving. Kit has already paid for itself for us.

AdamIndy

1,661 posts

135 months

Wednesday 6th September 2017
quotequote all
Also keep an eye on the bay for someone selling all their stuff. I bought all mine off there for £90 because after buying all the kit he decided it was too difficult!rolleyes

LuS1fer

43,566 posts

276 months

Wednesday 6th September 2017
quotequote all
I'm always too tyred to try.

Tagzy_biker

Original Poster:

17 posts

114 months

Wednesday 6th September 2017
quotequote all
Thanks fellas I'll definitely be giving this a go. Some practice attempts on my cars space saver might be in order before I go damaging anything valuable!

cbmotorsport

3,065 posts

149 months

Thursday 7th September 2017
quotequote all
LuS1fer said:
I'm always too tyred to try.
As puns go, I find this rather deflating.


LuS1fer

43,566 posts

276 months

Thursday 7th September 2017
quotequote all
The thing is, I have a local mobile tyre fitter who will attend here, remove the wheel, fit a new tyre and put it back on the bike for £25.

NITO

1,351 posts

237 months

Saturday 9th September 2017
quotequote all
I was considering this Abba kit just recently which gives you pretty much everything you need in one smart package...

http://www.abbastands.co.uk/product-detail.asp?pid...