Griff rear lights not working.

[ToneyCaroney]

Hi all,
So I'm leaving the Revival and my rear lights aren't working. Brake lights and indicators are working fine. Didn't check hazards or reverse light. Is this likely a fuse? If so, which one?

Thanks for the help

[Steve_D]

Much depends on the age of the car as there are several circuits used.
In my 97 Chim the side lights are controlled by the lighting module. In this case the front and rear lights are powered from the same source so if yours is the same then both front and rear lights should be working irrespective of fuses.

Are the number plate lights working? if so I would suspect either failed or corroded bulbs.

If not then the wiring between Dash/footwell and back of car. Does the Griff have loom connectors behind the carpet in the passenger B post? If so then these would also be a favourite.

Steve

[ToneyCaroney]

Thanks Steve, appreciate the info. Sounds stupid but the rear lights came on when I gave the dash button a harder push. Front and dash lights come on without such a hard prod. Probably needs investigating further but working for now.
Cheers, Stuart