2006 V8V Yaw sensor issue

[morty1961]

I have a DSC service required message and traction control is temporarily disabled. Normally it is either the Brake pressure transducer or the brake pedal switch transducer that causes this but It was in at Bridge Mill for its yearly service and after plugging into AMDS it seems its the Yaw sensor that's causing the problem and needs replacing. Bit of a bugger to do apparently....anyway has anyone else had this replaced or tried a DIY fix on this?

[morty1961]

anyone?

[R129 300SL]

Probably a Volvo or Ford part.

Need to find where it is located. Possibly under centre console like on Mercedes.

Is plug and play I think.

[R129 300SL]

Just checked aston Martin bits and it looks like it's located in front wheel arch on passenger side. Prob behind the liner. Have a look yourself to confirm.

Looks pricy at £192 for the part. Sure it would be cheaper if you can find if it is a Ford/Volvo cross reference part.

[KevinBird]

Its on the transmission tunnel behind the heating controls but it may not have failed

Get it properly diagnosed