Salt on the roads
Author
Discussion

KumiSinghs

Original Poster:

63 posts

158 months

Monday 9th October 2017
quotequote all
What do you guys mean by 'salt on the roads' will corrode my bike? Is it that white stuff that's visible on my bike after a longish ride (in the cold months) - or are you guys talking about the actual gritting salt?

Sorry for such a newbie question.

If you don't mind answering another question - how do you apply ACF50 - I'm thinking to get the spray bottle version not the aerosol one.

Rawwr

22,722 posts

265 months

Monday 9th October 2017
quotequote all
If it looks like a crusty spunk stain, it's salt, which you get once the roads have been gritted.

ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.

KumiSinghs

Original Poster:

63 posts

158 months

Monday 9th October 2017
quotequote all
Rawwr said:
If it looks like a crusty spunk stain, it's salt, which you get once the roads have been gritted.

ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
I see the stains you're talking about biggrin, but the roads haven't been gritted yet?

Birky_41

4,661 posts

215 months

Monday 9th October 2017
quotequote all
KumiSinghs said:
Rawwr said:
If it looks like a crusty spunk stain, it's salt, which you get once the roads have been gritted.

ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
I see the stains you're talking about biggrin, but the roads haven't been gritted yet?
That has got to be the best explanation of road salt I've ever read laugh

If you already have it on there chances are the bikes had atleast one winter and its already got to parts. Riding in all weathers including summer rain can start it a bit but there normally needs to be something on the ground to get it happening

I see bolts on my bike go furry and dull looking just from spring/summer riding

ACF50 is messy stuff I found but it does work. I put a rag over my brakes and tyres and then sprayed away to my hearts content

KumiSinghs

Original Poster:

63 posts

158 months

Monday 9th October 2017
quotequote all
Birky_41 said:
KumiSinghs said:
Rawwr said:
If it looks like a crusty spunk stain, it's salt, which you get once the roads have been gritted.

ACF50: A little goes a long way. I did my bikes at the weekend, spray on major pieces of the bike and then use a cloth to work it into the tighter areas. Be careful around brakes and tyres, it's slippery stuff.
I see the stains you're talking about biggrin, but the roads haven't been gritted yet?
That has got to be the best explanation of road salt I've ever read laugh

If you already have it on there chances are the bikes had atleast one winter and its already got to parts. Riding in all weathers including summer rain can start it a bit but there normally needs to be something on the ground to get it happening

I see bolts on my bike go furry and dull looking just from spring/summer riding

ACF50 is messy stuff I found but it does work. I put a rag over my brakes and tyres and then sprayed away to my hearts content
Its a brand new bike and never has seen winter. I'll order the ACF today, it'll come tomorrow, I'll wash my bike using the 2 bucket method and put the ACF50 on.

Cheers deary.

Gavia

7,627 posts

122 months

Monday 9th October 2017
quotequote all
KumiSinghs said:
Its a brand new bike and never has seen winter. I'll order the ACF today, it'll come tomorrow, I'll wash my bike using the 2 bucket method and put the ACF50 on.

Cheers deary.
Two bucket method rolleyes

Biker's Nemesis

41,486 posts

239 months

Monday 9th October 2017
quotequote all
Gavia said:
Two bucket method rolleyes
If it's covered in st I use the "2 Girls 1 cup" method.

Yes yes yes it doesn't make sense but there's a distant link there.

KumiSinghs

Original Poster:

63 posts

158 months

Monday 9th October 2017
quotequote all
I don't quite follow. Is the two bucket method not satisfactory?

Rawwr

22,722 posts

265 months

Monday 9th October 2017
quotequote all
Biker's Nemesis said:
If it's covered in st I use the "2 Girls 1 cup" method.
You're a terrible person.

Biker's Nemesis

41,486 posts

239 months

Monday 9th October 2017
quotequote all
KumiSinghs said:
I don't quite follow. Is the two bucket method not satisfactory?
I don't know, I only have one bucket with a broken handle. I make sure I use plenty of Fairy Washing up liquid though. Only the best for my cars and bikes.

CaptainSlow

13,179 posts

243 months

Monday 9th October 2017
quotequote all
KumiSinghs said:
Its a brand new bike and never has seen winter. I'll order the ACF today, it'll come tomorrow, I'll wash my bike using the 2 bucket method and put the ACF50 on.

Cheers deary.
Chinese?

KumiSinghs

Original Poster:

63 posts

158 months

Monday 9th October 2017
quotequote all
CaptainSlow said:
Chinese?
2017 R6

Pothole

34,367 posts

313 months

Monday 9th October 2017
quotequote all
KumiSinghs said:
I don't quite follow. Is the two bucket method not satisfactory?
Relax. The second word in the name if this forum is banter, a synonym for pisstaking.

KumiSinghs

Original Poster:

63 posts

158 months

Monday 9th October 2017
quotequote all
Pothole said:
Relax. The second word in the name if this forum is banter, a synonym for pisstaking.
Of course holmes, just trying figure it out. I don't wanna scratch my bike to bits whilst trying to looking after it. Thought as this forum has a *wealth* of experience why not ask here.

smile

jonindorset

1,082 posts

275 months

Monday 9th October 2017
quotequote all
ACF50 can come out of the can rather thick so it may be best to place it in a bucket of hot water to thin it before applying

KumiSinghs

Original Poster:

63 posts

158 months

Tuesday 10th October 2017
quotequote all
jonindorset said:
ACF50 can come out of the can rather thick so it may be best to place it in a bucket of hot water to thin it before applying
Even the spray version? But okay, it should be coming today - Once i'm home I'll wash my bike and then apply ACF

shielsy

826 posts

160 months

Tuesday 10th October 2017
quotequote all
I prefer to spray the acf into the lid of the can then use a brush to apply it on the shiny bits. Whenever I've tried to spray directly onto the bike it goes on too thick and makes a bit of a mess.

Wait Here Until Green Light Shows

16,952 posts

231 months

Wednesday 11th October 2017
quotequote all
Make sure you get plenty of ACF-50 on the exhaust headers - it smells lovely smile (no - it really does, and the resulting smoke plume is impressive)
Warm it first in hot water.
DO NOT wear your best clothes when applying it - it stains fabric good and proper.
You can apply it everywhere (except brakes!!) Plastics come up a treat, aluminium, inside electrical connectors etc.
If you get it on painted surfaces, it can be buffed to a shine. It hides scratches quite well.
If you get it on your brakes - your brakes will no longer work. It's not like they're a little worse than usual, they literally no longer work.
It does attract dust and dirt a little more than usual - but washing the bike is often easier as the dirt slips off.
You ideally need to get it everywhere water can get...under seat, behind the fairing etc.
It's good stuff.

KumiSinghs

Original Poster:

63 posts

158 months

Wednesday 11th October 2017
quotequote all
Wait Here Until Green Light Shows said:
Make sure you get plenty of ACF-50 on the exhaust headers - it smells lovely smile (no - it really does, and the resulting smoke plume is impressive)
Warm it first in hot water.
DO NOT wear your best clothes when applying it - it stains fabric good and proper.
You can apply it everywhere (except brakes!!) Plastics come up a treat, aluminium, inside electrical connectors etc.
If you get it on painted surfaces, it can be buffed to a shine. It hides scratches quite well.
If you get it on your brakes - your brakes will no longer work. It's not like they're a little worse than usual, they literally no longer work.
It does attract dust and dirt a little more than usual - but washing the bike is often easier as the dirt slips off.
You ideally need to get it everywhere water can get...under seat, behind the fairing etc.
It's good stuff.
Thank you!! I washed my bike yday, and applied ACF50 with a kitchen towel.
  • I didn't take the fairings off - I may need to.
  • I didn't apply to the electrics, so I'm gonna go to town on the dash
  • I'll redo the header as you say.
  • I'll unscrew the seat and go mad there too.
One thing, some parts of the bike were still wet when I applied it, and it kinda foamed up when I tried to rub it in using the towel, is that still okay?

Wildfire

9,951 posts

283 months

Wednesday 11th October 2017
quotequote all
Ideally you want the bike totally dry before you apply ACF-50.

Spray a little in a cloth and use that to apply it to bolts and parts near the brakes.

In a month or so I will spend a good few hours washing, drying and then coating the bike for winter use.

Then don’t wash it off until spring. Bike looks awful, but when you do wash it off, underneath it will be as before you coated it.