SWAP: New V12S bonnet grills
Discussion
ptallett said:
Pics will come when I take delivery. Its still at the factory.
Still at the factory - so its a new car? If so why didn't you just spec them or is it a late change of mind? Even so it might not be too late to try to persuade them to change. Swapping them afterwards would be far more expensive.I can swap for around a grand https://dna-engineering.com/Vantage/Aston-martin-v...
Do you think the factory would switch? I doubt it.
BTW I was up at the factory to see the new Vantage - gorgeous! :-)
Cheers,
Paul
Do you think the factory would switch? I doubt it.
BTW I was up at the factory to see the new Vantage - gorgeous! :-)
Cheers,
Paul
Although AM charge a fortune for them , you can buy a full set of genuine AM factory CF vents from AM bits at the moment for £3500, so I guess as you can get close to £1500 for your mesh vents you would be close to break even.
https://astonmartinbits.com/models/8-V12-Vantage/p...
https://astonmartinbits.com/models/8-V12-Vantage/p...
ptallett said:
Hi!
I've just bought a new Vantage V12S Roadster with the new mesh bonnet grills, but I think I prefer the old Carbon Fibre ones.
Is there anyone out there with a V12S that prefers the new grilles and would like to swap?
Cheers,
Paul
I've got some fresh out of the mould that need testing for fit. Give me a shout on Monday and we can see if we can work something out.I've just bought a new Vantage V12S Roadster with the new mesh bonnet grills, but I think I prefer the old Carbon Fibre ones.
Is there anyone out there with a V12S that prefers the new grilles and would like to swap?
Cheers,
Paul
I'm a newbie at PH, how do I contact someone?
I'm wondering if replacing the vents would be a warranty/insurance issue. What if I get an engine overheating issue (unconnected with the vents of course)? What if the insurance needs to replace one and notices they are not stock?
Cheers,
Paul
I'm wondering if replacing the vents would be a warranty/insurance issue. What if I get an engine overheating issue (unconnected with the vents of course)? What if the insurance needs to replace one and notices they are not stock?
Cheers,
Paul
V12s said:
Hi divetheworld,
If you have 2 sets fresh out of the moulds, then I'd be keen to chat too !
Cool, I'll see what I can do. Email me so I've got your details.If you have 2 sets fresh out of the moulds, then I'd be keen to chat too !
ptallett said:
I'm a newbie at PH, how do I contact someone?
I'm wondering if replacing the vents would be a warranty/insurance issue. What if I get an engine overheating issue (unconnected with the vents of course)? What if the insurance needs to replace one and notices they are not stock?
Cheers,
Paul
Click on their user name and use the "email me" link.I'm wondering if replacing the vents would be a warranty/insurance issue. What if I get an engine overheating issue (unconnected with the vents of course)? What if the insurance needs to replace one and notices they are not stock?
Cheers,
Paul
Always let your insurance company know of any mods, even if the parts your fitting are factory fit. Its unlikely to change your premium.
If the parts fitted are the same spec as OEM then block exemption means you would be good.
If they are a factory option then why would your warranty be affected at all?
If your insurance are replacing vents then tell them where they came from to get a replacement.
I've changed tons of stuff on my car and never had a warranty issue. Even got a nice new £15k gearbox. But all my mods are cosmetic and inline with OEM. Invariably, my dealer cant tell the difference between the OEM and non anyway.
If I was brave enough, my car would have BR suspension amongst other things without a second thought. The only reason I have not is because I wouldn't want to fight a warranty denial for changing parts to non-standard spec.
My point is that putting on parts the same as OEM is likely to be very different to custom parts.... Unfortunately!
divetheworld said:
I've got some fresh out of the mould that need testing for fit. Give me a shout on Monday and we can see if we can work something out.
On the subject of carbon parts, are you making a central engine valley brace in CF for the current/outgoing 5.9 V12 engines, or if not do you have plans to ?Something like this, but at less than the £1,800 Aston are charging !
http://www.astonmartin.com/en/accessories/carbonfi...
Now the standard brace has no wings badge or indentation to take same, combined with the latest inlet manifolds that are all black, which have also lost the Aston branding, I do think some of the drama under the bonnet has been lost
jonby said:
On the subject of carbon parts, are you making a central engine valley brace in CF for the current/outgoing 5.9 V12 engines, or if not do you have plans to ?
Something like this, but at less than the £1,800 Aston are charging !
http://www.astonmartin.com/en/accessories/carbonfi...
Now the standard brace has no wings badge or indentation to take same, combined with the latest inlet manifolds that are all black, which have also lost the Aston branding, I do think some of the drama under the bonnet has been lost
When did this switch to the black manifolds happen? We were up at the factory over the weekend and saw that they were doing this on any new V12 engine's that were coming out. Seemed very strange. The white is definitely much better. Something like this, but at less than the £1,800 Aston are charging !
http://www.astonmartin.com/en/accessories/carbonfi...
Now the standard brace has no wings badge or indentation to take same, combined with the latest inlet manifolds that are all black, which have also lost the Aston branding, I do think some of the drama under the bonnet has been lost
Co - incidentally, does anyone know whether the manifolds as part of the AMR kit is black or white?
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff






Lets find someone who wants to make their car look newer first!