Issue with power fold mirros on a v8 vantage
Discussion
Ive got a 09 plate v8 vantage roadster, which has an issue with one of the power folder mirrors.
It struggles to go in / out reliably, its only one of them, the other one is fine.
The one with the issue will work fine 20% of the time, but the rest of the time it wont unfold when putting the ignition into standby, if it press both of the mirror selectors (to force the mirrors to fold) it will make a whiring sound, but not un folder, if i start the ignition, and press both the mirror selectors again it will 80% of the time unfold.
Going back in when locking it seems better, but will be slower than the fully working mirror and often whir for about 5 seocnds then make a loud click before it moves.
Has anyone come across an issue like this before, and do you know of the best way to rectify it ?
It struggles to go in / out reliably, its only one of them, the other one is fine.
The one with the issue will work fine 20% of the time, but the rest of the time it wont unfold when putting the ignition into standby, if it press both of the mirror selectors (to force the mirrors to fold) it will make a whiring sound, but not un folder, if i start the ignition, and press both the mirror selectors again it will 80% of the time unfold.
Going back in when locking it seems better, but will be slower than the fully working mirror and often whir for about 5 seocnds then make a loud click before it moves.
Has anyone come across an issue like this before, and do you know of the best way to rectify it ?
My passenger mirror did this - used to regularly fail to fold out. I took the mirror off the stalk and sprayed plenty of lube in the pivot point. It's worked perfectly for over a year since.
I expected to need a new mirror and sure I will at some point, but it's worth trying this first.
I expected to need a new mirror and sure I will at some point, but it's worth trying this first.
Assuming it's the same as my 2006 car:
There are 2 bolts at the end of the mirror mount which secure the mirror to the arm. One you can see with the mirror folded in. For the other one, you need to manually fold the mirror out further than its normal out position.
Once you remove those you can turn the mirror over. From memory there were 3 bolts holding on part of the pivot point onto the mirror. I removed that bit which allowed me to get lube into the moving bit.
There are 2 bolts at the end of the mirror mount which secure the mirror to the arm. One you can see with the mirror folded in. For the other one, you need to manually fold the mirror out further than its normal out position.
Once you remove those you can turn the mirror over. From memory there were 3 bolts holding on part of the pivot point onto the mirror. I removed that bit which allowed me to get lube into the moving bit.
It's worth trying a squirt or two of WD40 using the thin tube on the spray nozzle to get it into the pivot point first, give it a few squirts and keep cycling the mirror in and out, it cured mine without having to open my toolbox.
Just get a bit of cloth around the mirror arm the stop it getting on the Windows or paintwork, WD doesn't harm anything but the cloth saves a bit of cleaning up afterwords.
Just get a bit of cloth around the mirror arm the stop it getting on the Windows or paintwork, WD doesn't harm anything but the cloth saves a bit of cleaning up afterwords.
Edited by Manx V8V on Tuesday 21st November 16:44
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff


