Discussion
jon haines said:
I know this has been discussed before but has anyone done the mod were you take off the bottom of the plenum the pre heat thing i think its called and blank it off? and any advice would be appreciated.
Yep, there is a small water heated plate mounted under the throttle body that is used to heat the plenum, physically removing it's easy - You can just unbolt it but you then need to block the two M6 holes left in the plenum as they will let unmetered air in, I cut a couple of button heads down to make a couple of bungs and stuck them in with threadlock to seal them. Then you can either connect the two hoses together or reconfigure the pipework to suit. Gassing Station | Wedges | Top of Page | What's New | My Stuff