Trigger wheel on a serp

[jojackson4]

Part 2 of my dull questions for the ECU swap

I have got myself a JE trigger wheel
Will I require to rebalance the pulley when fitted ?
If so do you balance it neutral or can it be put back to the state it was before fiting the wheel as they were balanced with the crank (from what I have read)

[Boosted LS1]

You'll never know the difference, so if it was my engine I'd just fit it.

[Steve_D]

Agree not to rebalance.
Before you fit it do a piston stop test to confirm the TDC marking on the damper is correct. If it is not correct then the bonding of the rubber in the damper may have failed so now is the time to replace it.

Steve