DB9 transmission update
Discussion
tommyaml1998 said:
What it does it that it stops people selecting 'park' gear when on a steep hill so you have to apparently put your handbrake on first and then select park. And maybe enhance gear changes?
I think you are a little misinformed.The FMEA engineer in me questions ... what happens if the handbrake cable snaps or the switch malfunctions? In those examples You’d never be able to select ‘Park’, so I don’t think whatever the flash is , is the exact functionality you state?
enhance the shifts on an early DB9? Why would they bother at this late stage? But anyway, if it was a fix to a serious problem it would be handled via the std recall process where DVLA would pass to the automaker the database of owners who get contacted in that way.
There might well be an upgrade possible, say a flash of a late level DB9 with DBS trans shift maps, but there surely isn’t a major functional change needed for an early DB9, or if there was for safety reasons (what you state) it makes no sense if it isn’t part of a formal safety recall process?
A possible explanation is to address difficult release of the parklock pawl on a steep hill, in cases where the pawl is bearing the load of the car, not the handbrake. In the scenario suggested, the handbrake becomes the primary means of holding the car, and there is little load on the pawl, so it releases easily. The interlock may rely on an electric signal from the handbrake switch, in which case failure of the cable will not prevent engagement of park, because the switch will still function. Failure of the switch will prevent park being selected, but the handbrake will still work. In both failure cases a fault is apparent to the driver, but the car can still be safely parked. Just an idea.
Edited by john ryan on Wednesday 20th December 19:44
Edited by john ryan on Wednesday 20th December 21:01
Not sure if this is related but...
sometimes, when I start the car after not having driven it for a while, I get an error message (in red) when I want to go from P to R (and reverse out of my garage). Error message , I can't remember the exact wording but something like 'transmission fault..'.
This is solved by first selecting 'N' before putting the gear in 'R'.
I read in some posts that sometimes, the box is reluctant to go straight from P to R.
Could it be an upgrade to solve this problem ?
(and if not, anybody else have an explanation for this error message).
Once I get going and car is warmed up, don't see this message again, even when going from P to R directly...
Cheers,
Frank
sometimes, when I start the car after not having driven it for a while, I get an error message (in red) when I want to go from P to R (and reverse out of my garage). Error message , I can't remember the exact wording but something like 'transmission fault..'.
This is solved by first selecting 'N' before putting the gear in 'R'.
I read in some posts that sometimes, the box is reluctant to go straight from P to R.
Could it be an upgrade to solve this problem ?
(and if not, anybody else have an explanation for this error message).
Once I get going and car is warmed up, don't see this message again, even when going from P to R directly...
Cheers,
Frank
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff



