Radiator Fittings?
Author
Discussion

a98pmalcolm

Original Poster:

213 posts

108 months

Wednesday 27th December 2017
quotequote all
I hope everyone had a nice Christmas.

I am looking at changing my radiator tomorrow on my 2007 DB9 Auto. I have read the official manual and a few pointers online.

I am a little confused what some of the fittings are for on the radiator?
Thought I'd ask on here before I dive in tomorrow with the job.

I have circled the fittings in question.

Thanks



Edited by a98pmalcolm on Wednesday 27th December 13:31

AstonMartinV8Vantage

46 posts

111 months

Wednesday 27th December 2017
quotequote all
Hi there,

The two circled fittings are for the Auto gearbox cooler for a DB7 as that rad was used on early 9s,

a98pmalcolm

Original Poster:

213 posts

108 months

Wednesday 27th December 2017
quotequote all
ok great, thanks for the reply.

So just leave them open then or put 2 bolts in there...

smile

AstonMartinV8Vantage

46 posts

111 months

Wednesday 27th December 2017
quotequote all
See what the old rad has in it if nothing I'd leave the same or transfer the plugs over if they are in the old rad.

Sump

5,512 posts

198 months

Thursday 28th December 2017
quotequote all
Yup, irrelevant for the DB9. Did the job a couple of years ago. It's extremely straightforward, if I recall I had it knocked out in an afternoon, I do remember it being extremely tedious and OTT with headlights being removed and just general crap like this so I just stopped towards the end and finished off the next morning.

a98pmalcolm

Original Poster:

213 posts

108 months

Thursday 28th December 2017
quotequote all
Thanks fellas smile

Starting in the morning in the workshop at my place of work. Does seem all excessive to remove headlights and air boxes ect.

Hopefully the headlights wont be too out alignment after refitting,