removing a mirror from a wardrobe door
Discussion
I once saw a couple of guys remove a similar size mirror which was siliconed to a piece of wood - after they had put it on incorrectly.
They obtained a long piece of thin wire (piano??) and using a sawing motion "cut" through the adhesive with the wire. It took them half an hour or so & they were very careful to cut on the wood side so as to not knacker the silvering on the edges.
They obtained a long piece of thin wire (piano??) and using a sawing motion "cut" through the adhesive with the wire. It took them half an hour or so & they were very careful to cut on the wood side so as to not knacker the silvering on the edges.
Gassing Station | The Pie & Piston Archive | Top of Page | What's New | My Stuff


