Custom exhaust silencer bypass completed.
Custom exhaust silencer bypass completed.
Author
Discussion

speedracer800

Original Poster:

102 posts

151 months

Sunday 28th January 2018
quotequote all
I wanted to create a remote controlled bypass to route exhaust around the silencer in my DBS to give me a more aggressive exhaust note on demand without having a bunch of constantly annoyed neighbors. smile

It was important to me that I used as much of the cars original equipment for controlling the valves as possible.

The original "stock" silencer of course came equipped with a pair of vacuum controlled bypass valves but my Tubi aftermarket silencer wasn't equipped with this so I first had to create this. I sourced some vacuum controlled valves online and then figured out a location on the silencer to fit the valves and bypass pipes. See pictures.

The other picture shows a yellow arrow indicating the valve and bypass pipe that were added to the silencer and the green arrow indicates the flow of the exhaust gas to help show how it all is designed to function.

I found a company called "cccharger.Co.uk" They created a very simple kit that enables the exhaust valves to be open and closed using a remote control. Clive helped me modify his kit to operate a bit differently to allow me to open and close my valves at any RPM.

I made a quick video today showing the exhaust in both open and closed position. About halfway through the video you'll hear the tone change when I pushed the button on the remote to open the valves.. Again using the cars original compressor. I think it sounds terrific and gives me the best of both worlds. I should also mention that my DBS is fit with secondary cat delete pipes as well.

https://youtu.be/xR5uQfYmJRY

[url]

|https://thumbsnap.com/2eFLgOLz[/url][url]

|https://thumbsnap.com/wrlUCOJl[/url][url]

|https://thumbsnap.com/McxuGsYp[/url]

justin220

5,764 posts

235 months

Sunday 28th January 2018
quotequote all
Love that!

macdeb

8,760 posts

286 months

Sunday 28th January 2018
quotequote all
Very cool cool

shinjuku

477 posts

112 months

Sunday 28th January 2018
quotequote all
I have one of these exhausts (not currently fitted) and have an OEM exhaust fitted with my high-flow cats at present.

With the valves in place, is the Tubi significantly quieter than it was?

a98pmalcolm

213 posts

108 months

Sunday 28th January 2018
quotequote all
Awesome job

divetheworld

2,565 posts

166 months

Sunday 28th January 2018
quotequote all
Tidy!

speedracer800

Original Poster:

102 posts

151 months

Monday 29th January 2018
quotequote all
shinjuku said:
I have one of these exhausts (not currently fitted) and have an OEM exhaust fitted with my high-flow cats at present.

With the valves in place, is the Tubi significantly quieter than it was?
Thank you all for the compliments.

I'm not sure what you are asking unfortunately. I added the bypass pipes and valves to the Tubi silencer. I'd say before I did this the Tubi was a bit on the quieter side as compared to the many other silencers I've tried in my DB9 and DBS. I believe the Tubi has a "xpipe" internal design which always has a tendency to quiet down an exhaust system. Now with these valves opened up, the exhaust gas is completely bypassing the silencer so the change in terms of both volume as well as "tone" is very significant.. I absolutely love it.

AB

20,672 posts

226 months

Monday 29th January 2018
quotequote all
My brother bought my Dad this for Christmas for his DB9 GT.

It's great.

leerandle

834 posts

138 months

Monday 29th January 2018
quotequote all
So you've made the exhaust even louder, but now can control the noise level a bit !!

That is a nice bit of design work and craftsmanship, I have a similar non valved 'Loud' version Tubi exhaust, its epic.

Great work and well done.

shinjuku

477 posts

112 months

Monday 29th January 2018
quotequote all
speedracer800 said:
I'm not sure what you are asking unfortunately.
I was just wondering if the exhaust is now quieter or louder, but you answered the question smile