Diamond cut alloys Vantage - refurbing
Diamond cut alloys Vantage - refurbing
Author
Discussion

phib

Original Poster:

4,520 posts

290 months

Wednesday 7th February 2018
quotequote all
Hi All,
Looks like I have finally found a Vantage !!!
It has the carbon alloys on it at the moment but they have been made all black as opposed to the diamond cut two tone alloys.
Basically I want to put the alloys back to how they originally were, can anyone recommend a company that can do this and a rough cost please.
https://www.conceptcarz.com/view/photo/590214,1879...


Thanks
Phib


Edited by phib on Wednesday 7th February 11:05


Edited by phib on Wednesday 7th February 11:06

Speculatore

2,003 posts

266 months

Wednesday 7th February 2018
quotequote all
Depends where about in the country you are. Your profile says Monaco and shows a Bentley GT

phib

Original Poster:

4,520 posts

290 months

Wednesday 7th February 2018
quotequote all
Speculatore said:
Depends where about in the country you are. Your profile says Monaco and shows a Bentley GT
Ah yes, Monaco for some of the year and surrey when back in the UK

Thanks

Phib

tonyhall38

4,194 posts

247 months

Wednesday 7th February 2018
quotequote all
wheel works in Crawley....West Sussex

justin220

5,764 posts

235 months

Wednesday 7th February 2018
quotequote all
Any AM dealer will do it for you. It's pricey but at least it'll be right.

I went the other way, went from the polished face, to all black as I was fed up with the chips/oxidation marks

phib

Original Poster:

4,520 posts

290 months

Wednesday 7th February 2018
quotequote all
Thanks will give them a call, I have the dealer quoting but it seems quite a lot £200 a wheel ?

Phib

liner33

10,861 posts

233 months

Wednesday 7th February 2018
quotequote all
Might be a good reason they did that as you can only refurb diamond cut wheels a couple of times

phib

Original Poster:

4,520 posts

290 months

Wednesday 7th February 2018
quotequote all
liner33 said:
Might be a good reason they did that as you can only refurb diamond cut wheels a couple of times
A good point, car coming from main dealer so I am sure they will sort.

If not I would be happy with Gunmetal

Phib

mhurley

823 posts

164 months

Wednesday 7th February 2018
quotequote all
liner33 said:
Might be a good reason they did that as you can only refurb diamond cut wheels a couple of times
I've heard this before. What is the reason?

liner33

10,861 posts

233 months

Wednesday 7th February 2018
quotequote all
mhurley said:
liner33 said:
Might be a good reason they did that as you can only refurb diamond cut wheels a couple of times
I've heard this before. What is the reason?
The wheels are machine cut so there is only so much material you can remove each time

johnnyBv8

2,482 posts

222 months

Wednesday 7th February 2018
quotequote all
mhurley said:
I've heard this before. What is the reason?
Because each time they cut away a layer of alloy.

My diamond cut alloys were refurbished i a couple of years ago, but despite not being kerbed are starting to corrode. It seems like it's always going to be a problem - not really practical. I was wondering whether a good wheel specialist could paint in two colours....a high shine chrome silver for what is currently diamond cut, and then graphite for the inserts (which is what they already are). Does anyone know if this is possible?!

Phib - congrats - is it the car in the link? If so, it looks fantastic. Any more details?

If you're happy with gunmetal all over, I'd be tempted to go with this - cheaper and longer-lasting.

Edited by johnnyBv8 on Wednesday 7th February 19:52

BravoV8V

1,858 posts

205 months

Wednesday 7th February 2018
quotequote all
phib said:
Thanks will give them a call, I have the dealer quoting but it seems quite a lot £200 a wheel ?

Phib
If you do do it via a dealer, insist that they send them back to the manufacturer (Rimstock) so that they come back with an OEM finish.

Don’t let them fob you off with a local firm. The diamond cut finish will never be the same.

Cold

16,750 posts

121 months

Wednesday 7th February 2018
quotequote all
BravoV8V said:
If you do do it via a dealer, insist that they send them back to the manufacturer (Rimstock) so that they come back with an OEM finish.

Don’t let them fob you off with a local firm. The diamond cut finish will never be the same.
Does it need to be the same? Surely it just needs to be pretty and hopefully a touch more durable than factory finish?
(Real question, not just being pedantic.)

David87

7,046 posts

243 months

Wednesday 7th February 2018
quotequote all
Lepsons in Kent. I wouldn't use anybody else.

phib

Original Poster:

4,520 posts

290 months

Wednesday 7th February 2018
quotequote all

Phib - congrats - is it the car in the link? If so, it looks fantastic. Any more details?

Well I will share more when I get it but its an earlier car than the photo but the same as in it has the N430 side skirts, carbon alloys, carbon front spitter / mirror caps, sports exhaust. full am history etc etc

Done 30k, new clutch at 28k all main dealer service history and coming from a main dealer so will have 140 point check and 12 months warranty as well as a free service and a host of all other extra freebees !!!

It is a 4.3 but I drove both a 4.3 and 4.7 and I couldn't really justify the extra for the 4.7 (each to their own and all that) given that its an everyday car for me.

Probably paid a bit more than I wanted but I figured the side skirts / carbon alloys ( sure they are actually called something else) sports exhaust, carbon bits, 12 months warranty and free service were worth it !!!

Phib




johnnyBv8

2,482 posts

222 months

Wednesday 7th February 2018
quotequote all
Sounds great - well done!

I'm guessing you went for the 2007 one at Stratstone - it came up in one of the threads/discussions. If so, it looks great in black with red calipers and the red stitching on the seats....will look even better once the wheels have been done!

Edited by johnnyBv8 on Wednesday 7th February 19:51