Shocks shorter than Bilsteins
Shocks shorter than Bilsteins
Author
Discussion

China100

Original Poster:

486 posts

115 months

Monday 19th February 2018
quotequote all
Morning All,

I have just fitted a full set of shiny new wishbones on my Chim at the weekend and fitted the original Bilsteins back on - but they almost look too long as the lower front wishbones look at a funny angle to the point I could question if I have the wrong ones on.

This isnt a car I have taken apart but acquired as a "box of Bits". so google is my reference point. Ultimately I am looking to replace these with Protech's. Are these shorter in length than the Bilsteins or a similar length?

Sardonicus

19,436 posts

250 months

Monday 19th February 2018
quotequote all
Should look like this below hanging, and note yellow damper body and red coil spring at front wink

ianwayne

8,502 posts

297 months

Monday 19th February 2018
quotequote all
The rear ones are the same colour but a different length, with yellow springs.

Check the part number stamped into the body of the shock. The fronts have a C in the part no ,the rears have a D. My old front ones were C0163. The later ones are C0422.

phazed

22,459 posts

233 months

Monday 19th February 2018
quotequote all
With my Gaz, the rears have a longer body, (more travel) and weaker springs.

325F/275R iirc.

BIG DUNC

1,925 posts

252 months

Monday 19th February 2018
quotequote all
Remember that when the weight of the car is on them, they wont be sitting at full length.