How easy is it to replace front upper wishbone (2006 V8V)?
Discussion
Car is in for a service.
They have listed a few items, most of which I intend to do myself. However - they've mentioned that the o/s/f upper wishbone needs replacing because the bush moves in the arm. (Not enough to cause an MOT failure 2 weeks ago).
I can do stuff to the car but I've never messed about with wishbones. How hard is it to change one? Any guides online? (Search didn't find one)
They have listed a few items, most of which I intend to do myself. However - they've mentioned that the o/s/f upper wishbone needs replacing because the bush moves in the arm. (Not enough to cause an MOT failure 2 weeks ago).
I can do stuff to the car but I've never messed about with wishbones. How hard is it to change one? Any guides online? (Search didn't find one)
davek_964 said:
Car is in for a service.
They have listed a few items, most of which I intend to do myself. However - they've mentioned that the o/s/f upper wishbone needs replacing because the bush moves in the arm. (Not enough to cause an MOT failure 2 weeks ago).
I can do stuff to the car but I've never messed about with wishbones. How hard is it to change one? Any guides online? (Search didn't find one)
Bush creep on any of the 4 upper / 4 lower wishbone arms will occur at some point in time (sooner if driven more spiritedly, later if the car is GT cruiser) on pretty much every Gaydon era non AMG car ever built.They have listed a few items, most of which I intend to do myself. However - they've mentioned that the o/s/f upper wishbone needs replacing because the bush moves in the arm. (Not enough to cause an MOT failure 2 weeks ago).
I can do stuff to the car but I've never messed about with wishbones. How hard is it to change one? Any guides online? (Search didn't find one)
MOT test can’t really fail the arm because there is no play, so it’s no surprise that it’s passed MOT but 2 weeks later is spotted on inspection.
There is no safety critical risk, there will be no play, no clonk or bang and nothing will fall off. The arm walks to one side of the mounting plate and the bush the other until hard-stop is reached and can creep out no more. Cars with bush wear will be slow to change direction at speed because of the slack in the arm / bush. There will probably be creaking over speed bumps and steering geometry will progressively go out of spec.
The upper arms is an Easy job though, it’s the lower arms which can be a swine and needs a geometry set up afterwards
BamfordMike said:
Bush creep on any of the 4 upper / 4 lower wishbone arms will occur at some point in time (sooner if driven more spiritedly, later if the car is GT cruiser) on pretty much every Gaydon era non AMG car ever built.
MOT test can’t really fail the arm because there is no play, so it’s no surprise that it’s passed MOT but 2 weeks later is spotted on inspection.
There is no safety critical risk, there will be no play, no clonk or bang and nothing will fall off. The arm walks to one side of the mounting plate and the bush the other until hard-stop is reached and can creep out no more. Cars with bush wear will be slow to change direction at speed because of the slack in the arm / bush. There will probably be creaking over speed bumps and steering geometry will progressively go out of spec.
The upper arms is an Easy job though, it’s the lower arms which can be a swine and needs a geometry set up afterwards
Thanks, very useful info.MOT test can’t really fail the arm because there is no play, so it’s no surprise that it’s passed MOT but 2 weeks later is spotted on inspection.
There is no safety critical risk, there will be no play, no clonk or bang and nothing will fall off. The arm walks to one side of the mounting plate and the bush the other until hard-stop is reached and can creep out no more. Cars with bush wear will be slow to change direction at speed because of the slack in the arm / bush. There will probably be creaking over speed bumps and steering geometry will progressively go out of spec.
The upper arms is an Easy job though, it’s the lower arms which can be a swine and needs a geometry set up afterwards
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff



