Vantage twin LED driving lights.
Discussion
OK guys, this has been nagging me for a while and I’m 50/50 split on getting a spare grill made up to accommodate two 5inch Hella LED lamps.
You can’t stick them in the middle like the racing GTE without a lot of modification behind the grill. They would however fit quite easily where I’ve positioned them in the photo.
What do people think?
On a side note, I’ve just installed Divinatech’s sequential back light update and they’re absolutely fabulous, even though I never get to see them in action. Plus the service was second to none.
Anyway, what do people think.
You can’t stick them in the middle like the racing GTE without a lot of modification behind the grill. They would however fit quite easily where I’ve positioned them in the photo.
What do people think?
On a side note, I’ve just installed Divinatech’s sequential back light update and they’re absolutely fabulous, even though I never get to see them in action. Plus the service was second to none.
Anyway, what do people think.
It might be easiest to get an AMR grille and cut out the center where you want the rally lights to sit, then make a mounting bracket for the lights. The AMR grill doesn't use the central mounting points of the standard grilles, so you can use those for mounting points for the light bracket. And if you wanted to revert to stock, the only non-reversible thing you'd be doing is cutting up the AMR grille.
It might be a bit of a job if you plan on using the existing grille. Most Vantages have 6 or 8 aluminium horizontal bars clicked into 4 grey plastic uprights. As a totality it's a rigid structure. With some of the horizontals cut then it won't hang together. The AMR idea is good, maybe GT8 or V12. Or custom make a grille, if you're bold. I had a look at the under grille on our runabout Mini Cooper (2004) the other day and it looks like someone went down to Wickes (Picture below is lifted from the internet). Sprayed black however, no-one would be any wiser.

There are companies who can knock up custom grills and surrounds. Never thought to look before.
Mine was damaged by a crow early on, one of the horizontals came off and one was bent. One of the uprights broke off. It just about held together. I replaced it last year. This is from AstonMartinBits:

There are companies who can knock up custom grills and surrounds. Never thought to look before.
Mine was damaged by a crow early on, one of the horizontals came off and one was bent. One of the uprights broke off. It just about held together. I replaced it last year. This is from AstonMartinBits:
Could you mount some behind the grille? That way they are invisible until you hit the on switch?
Ones packaged like this might be just the ticket?
https://www.diodedynamics.com/2015-2017-subaru-wrx...
Ones packaged like this might be just the ticket?
https://www.diodedynamics.com/2015-2017-subaru-wrx...
I think the lights in the grill would probably look ok,
but the manufacturing of the grill will be a large effort, as one would need to weld in the rings.
And of course the grill would need to look perfect...
If it is better lighting you are after I would rather look into upgrading the stock headlights, as these are quite poor from a light quality point of view.
My daily driver, a 2004 BMW with it's stock Bi-Xenon "outshines" my 07 Vantage easily.
So replacing the Vantage's low-beam xenon with a bi-xenon (or more modern bi-LED) would help a lot.
Also the Vantage's high-beam would benefit from a more modern LED replacement.
However...that would be a huge effort on manufacturing as well...
Thomas
but the manufacturing of the grill will be a large effort, as one would need to weld in the rings.
And of course the grill would need to look perfect...
If it is better lighting you are after I would rather look into upgrading the stock headlights, as these are quite poor from a light quality point of view.
My daily driver, a 2004 BMW with it's stock Bi-Xenon "outshines" my 07 Vantage easily.
So replacing the Vantage's low-beam xenon with a bi-xenon (or more modern bi-LED) would help a lot.
Also the Vantage's high-beam would benefit from a more modern LED replacement.
However...that would be a huge effort on manufacturing as well...
Thomas
Edited by TR-Spider on Sunday 11th March 12:28
Here are some rectangle LED's mounted behind the grille, fitted to the front crossmember. You can see just how much brighter they are than the cars standard lights which are on full beam in this picture. These are Lazer ST4's, around 3500 lumens EACH, or double the output of an aftermarket HID (high intensity discharge) lamp.

The one bit of the V8V design that I thought looked a little clumsy from some angles was the lower quarter of the front valance - the dead space below the headlight but to each outer side of the grilles.
Something, either round or perhaps mirroring the shape of the grille, set into that space would address that I reckon, and soften that angle/make it more functional.
Something, either round or perhaps mirroring the shape of the grille, set into that space would address that I reckon, and soften that angle/make it more functional.
Gassing Station | Aston Martin | Top of Page | What's New | My Stuff






