BMW 320i KNOCKING NOISE
Discussion
Hi guys, wonder if anybody can help me....
have just bought a BMW 320i MSport 2008... a few days after it has started knocking, sounds as if it’s coming from the top of the engine. The car constantly knocks, when you rev the vehicle it becomes ALOT louder. Any advice would help.
Many thanks Lewis
have just bought a BMW 320i MSport 2008... a few days after it has started knocking, sounds as if it’s coming from the top of the engine. The car constantly knocks, when you rev the vehicle it becomes ALOT louder. Any advice would help.
Many thanks Lewis
https://youtu.be/C4yKARHetwg
https://youtu.be/4yBfysOV9uk
Thanks for the reply lord... I have attached some videos below. The oil level is also fine. Many thanks Lewis
https://youtu.be/4yBfysOV9uk
Thanks for the reply lord... I have attached some videos below. The oil level is also fine. Many thanks Lewis
Edited by Lew9204 on Sunday 11th March 17:10
Hmmm . that's not a healthy sound
It doesn't sound like either hydraulic lifters or timing chain. As you say it's a knocking sound.
It's difficult to say and it could well be coming from the bottom end and being amplified by the plastic inlet manifold.
You need a garage to get a stethoscope on it and locate the source. I would do this as a matter of urgency
It doesn't sound like either hydraulic lifters or timing chain. As you say it's a knocking sound.
It's difficult to say and it could well be coming from the bottom end and being amplified by the plastic inlet manifold.
You need a garage to get a stethoscope on it and locate the source. I would do this as a matter of urgency
That sounds like a big end crankshaft bearing gone. This video shows what makes that sound when it breaks.
https://www.youtube.com/watch?v=Pu2RHsIGBXU
https://www.youtube.com/watch?v=Pu2RHsIGBXU
Mignon said:
That sounds like a big end crankshaft bearing gone. This video shows what makes that sound when it breaks.
https://www.youtube.com/watch?v=Pu2RHsIGBXU
That's what I was intimating above but without trying to make the OP cry.https://www.youtube.com/watch?v=Pu2RHsIGBXU
It does sound like it's crank related to me - big end or a spun rod bearing.
helix402 said:
The noise will be the stretched timing chain hitting the cam cover.
.. and the timing chain stretched massively immediately after the OP bought it?Seems more likely to me that the seller knew the engine was already on the way out and filled it with thick oil / sawdust / whatever to keep it quiet for a few days.
GreenV8S said:
helix402 said:
The noise will be the stretched timing chain hitting the cam cover.
.. and the timing chain stretched massively immediately after the OP bought it?Seems more likely to me that the seller knew the engine was already on the way out and filled it with thick oil / sawdust / whatever to keep it quiet for a few days.
My money is on the bottom end sadly.
I'd be highly surprise if the seller wasn't aware of this issue before selling, unless the OP has given it death since buying and maybe over revved it; stretching the head bolts
Gassing Station | Engines & Drivetrain | Top of Page | What's New | My Stuff



ked. Time for a new engine